HIKVISION DS-9100HDI-S Series Hızlı Başlangıç Kılavuzu

DVR HIKVISION DS-9100HDI-S Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION DS-9100HDI-S Series 2 sayfaları. Ds-9100hdi-s dvr

Sayfayı Yazdır

USA

Inc.

A Division of Hikvision China

First Choice For Security Professionals

Quick Start

NOTE: Connect VGA monitor and mouse before starting.

1. Overview

2. Connection

3. Start Up/Shutdown

4. Formatting a Disk

5. Setting Date & Time

6. Recording

7. Playback

8. Backup

NOTE: For more detailed information, refer to the Users Manual on

the CD-ROM. You must use your PC or MAC to access the files.

www.hikvision-usa.com

USA

Inc.

A Division of Hikvision China

First Choice For Security Professionals

Startup and Shutdown

(cont.)

To shutdown your DVR:

OPTION 1: Standard Shutdown

1. Enter the Shutdown menu by going to Main Menu > Maintenance > Shutdown.

2. Select the Shutdown button.

3. Click the Yes button.

OPTION 2: Manual Shutdown

1. Press and hold the POWER button for 3 seconds.

2. Enter the administrator's username and password

in the dialog box for authentication.

3. Click the Yes button.

NOTE: Do not press the POWER button again

when the system is shutting down.

4. Formatting a Disk

NOTE: One hard disk drive (HDD) is already installed and formatted in this DVR.

A newly installed hard disk drive (HDD) must be formatted first before it can be used with your DVR.

NOTE: Formatting the disk will erase all data on it.

To format a new disk:

1. Enter the Disk Management menu by going to Main Menu > System Configuration

> Disk Management.

2. Select a disk to format. A disk that has not been formatted will show Error Detected as its status.

If the disk is one that is newly installed, the status of the drive will show up as Non-Active and the

Reformat button will change to the Add button.

3. Click the Add button.

www.hikvision-usa.com

Quick Start Guide

DS-9100HDI-S DVR Version 2.0

1. Overview

Check that your package includes the following:

Series 4 DVR

Hard Drive (PreInstalled)

Front Panel Description:

Quick Start Guide

DS-9100HDI-S DVR Version 2.0

Formatting a Disk

4. A confirmation message will appear on the screen.

Click the Yes button to continue formatting process.

5. A format progress bar will be shown on the menu.

After the disk has been formatted, the status of the

disk will change to Active.

6. Click the Done button to exit out of Disk Management.

5. Setting Date & Time

To setup date and time:

1. Enter the Time/Date menu by going to Main Menu

> System Configuration > Time/Date.

2. Enter the correct date and time.

3. Click the Save button to save the setting.

Quick Start Guide

Mouse

IR Remote

Power Cord

HDD Cables

Rack Mount Ears

Quick Start Guide

Manual/Software CD

1. Power Button

5. Alphanumeric Buttons

2. IR Receiver

6. Control Buttons

3. USB Ports

7. Direction/Enter Button

4. Status Indicators

8. Jog Shuttle Control

Quick Start Guide

(cont.)

Quick Start Guide

DS-9100HDI-S DVR Version 2.0

2. Connection

Internet

Screws

Router

Ethernet

Alarm

Output

Input

3. Startup and Shutdown

To startup your DVR:

1. Plug power cord into DVR and electrical outlet. It is HIGHLY recommended to use a surge

protector. The Power indicator LED on the front panel will turn red.

2. Connect a VGA monitor and mouse into the DVR. NOTE: Monitor and mouse needs to be

plugged in before starting.

3. Switch the POWER botton on the back rear panel. The Power indicator LED will turn blue.

The unit will begin to start.

NOTE: Default password is 12345

Quick Start Guide

DS-9100HDI-S DVR Version 2.0

6. Recording

To setup quick recording schedule:

1. Enter the Quick Schedule Configuration menu by

going to Main Menu > Recording Configuration

> Quick Schedule Configuration.

2. Select the camera to configure from the camera

drop down menu. If all the cameras are to be configured

with the same settings, select All Cameras from the list.

3. Check the Enable checkbox to enable the recording

schedule. If the checkbox is unchecked, the recording

schedule will be disabled.

4. Check the 24/7 checkbox if you would like to record continuously or on event for 24 hours a

day, 7 days a week. If you wish to schedule different time frames for Monday through Sunday,

leave the 24/7 checkbox unchecked and skip to step 6.

5. Select Recording Type for 24/7 recording and move on to step 8. Recording type includes

Continuous for continuous recording or On Event for recording when an event is triggered (i.e.

from detected motion).

6. Select the start and stop time for each day of the week. The start and stop time are listed

using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm).

7. Select Recording Type for each day of the week. Recording type includes Continuous for

continuous recording or On Event for recording when an event is triggered (i.e. from detected

motion) for the selected time period.

8. Check the Enable Audio checkbox if you would like to enable audio recording along with the

video. Audio can only be recorded if an amplified audio source is connected to the DVR.

9. Select the Save button to save the schedule settings and select Exit to return to the previous

menu. Selecting the Exit button without clicking Save will quit out of the menu without saving

settings.

Note: On Event recordings are recordings that are triggered from motion detection and/or from

an external alarm See "Configuring Alarms and Exceptions" on page 61 of the user manual.

USA

Inc.

A Division of Hikvision China

First Choice For Security Professionals

Speaker

VGA Monitor

Main Monitor

Aux/Spot Monitor

USB Mouse

Keyboard

IR Remote

Audio Input

USB Device

Analog Dome

Analog Camera

www.hikvision-usa.com

USA

Inc.

A Division of Hikvision China

First Choice For Security Professionals