Lexmark 20T4450 - T 622n B/W Laser Printer Hızlı Referans - Sayfa 2

Yazıcı Lexmark 20T4450 - T 622n B/W Laser Printer için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark 20T4450 - T 622n B/W Laser Printer 2 sayfaları. Lexmark optra t620: quick reference

Sayfayı Yazdır

Operator panel menus

Paper Menu

Finishing Menu

Utilities Menu

Paper Source

Duplex

Print Menus

Paper Size

Duplex Bind

Print Net <x> Setup

Paper Type

Copies

Print Fonts

Custom Types

Blank Pages

Print Directory

Universal Setup

Collation

Factory Defaults

Output Bin

Separator Sheets

Format Flash

Configure Bins

Separator Source

Defragment Flash

Overflow Bin

Multipage Print

Format Disk

Assign Type/Bin

Multipage Order

Job Acct Stat

Substitute Size

Multipage View

Hex Trace

Configure MP

Multipage Border

Envelope Enhance

Staple Job

Paper Texture

Staple Prime Src

Paper Weight

Offset Pages

Paper Loading

PostScript Menu

Serial Menu

Parallel Menu

PCL SmartSwitch

Print PS Error

PCL SmartSwitch

Font Priority

PS SmartSwitch

NPA Mode

Serial Buffer

Parallel Buffer

Job Buffering

RS-232/RS-422

Advanced Status

RS-422 Polarity

Protocol

Serial Protocol

Honor Init

Robust XON

Parallel Mode 1

Baud

Parallel Mode 2

Data Bits

Parity

Honor DSR

Network Menu

Infrared Menu

USB Menu

PCL SmartSwitch

Infrared Port

PCL SmartSwitch

PS SmartSwitch

PCL SmartSwitch

PS SmartSwitch

NPA Mode

PS SmartSwitch

NPA Mode

Network Buffer

NPA Mode

USB Buffer

Job Buffering

Infrared Buffer

Job Buffering

Network <x> Setup

Job Buffering

Mac Binary PS

Window Size

Transmit Delay

Max Baud Rate

Accessing paper jam areas

You open doors and covers, remove paper trays, and remove options to access paper jam areas. If your

Job Menu

Quality Menu

printer has a multipurpose feeder, it is visible when the lower front door is opened. The illustration shows the

Confidential Job

Print Resolution

location of paper sources and possible paper jam areas.

Held Jobs

Toner Darkness

Cancel Job

PQET

Reset Printer

PictureGrade

Print Buffer

Prime Stapler

Reset Active Bin

27x Paper Jam

28x Paper Jam

Rear door of:

5-bin mailbox

Output expander

(High-capacity

output stacker

and StapleSmart

not shown)

202 Paper Jam

Printer rear door

PCL Emul Menu

Setup Menu

Font Source

Printer Language

Font Name

Power Saver

230 Paper Jam

Point Size

Resource Save

Pitch

Duplex rear door

Download Target

Symbol Set

Print Timeout

Orientation

Wait Timeout

Lines per Page

250 Paper Jam

Auto Continue

A4 Width

Jam Recovery

Lower front door

Tray Renumber

Page Protect

(down when envelope

Auto CR after LF

Display Language

feeder is installed)

Auto LF after CR

Alarm Control

Toner Alarm

Staple Alarm

24x Paper Jam

Job Accounting

Integrated input tray

Warning:

Do not attempt to clear any paper jam using tools or instruments. This may permanently

LocalTalk Menu

damage the printer.

LocalTalk Port

PCL SmartSwitch

PS SmartSwitch

NPA Mode

LocalTalk Buffer

Job Buffering

NPA Hosts

LocalTalk Name

LocalTalk Addr

LocalTalk Zone

200 Paper Jam

201 Paper Jam

Upper front door

260 Paper Jam

Envelope feeder

230 Paper Jam

Duplex front

access cover

24x Paper Jam

Paper trays

Printed in U.S.A.

This document is printed on recycled paper. 1/01

E.C. 1K0911

P/N 11K3143

Print quality problems

Problem

Action

Print is too light.

• The toner may be low. To utilize the remaining toner, remove the

cartridge by gripping the handles with both hands. With the cartridge

arrows pointing downward, shake the print cartridge back and forth.

Reinstall the cartridge and then press Go.

• Change the Toner Darkness setting in the Quality Menu.

• If you are printing on an uneven print surface, change the Paper

Weight and Paper Texture settings in the Paper Menu.

Verify that the correct print material is being used.

Toner fog or background shading

• Check the print cartridge to make sure it is installed correctly.

appears on the page.

• Change the print cartridge.

• If the problem continues, change the charge roll.

Streaks appear on the page.

• The toner may be low. To utilize the remaining toner, remove the

cartridge by gripping the handles with both hands, and then shake the

print cartridge vigorously. Reinstall the same print cartridge.

• If you are using preprinted forms, make sure the ink can withstand

temperatures of 212°C (414°F).

The job prints, but the top and side

• Make sure the Paper Size setting in the Paper Menu is correct.

margins are incorrect.

• Make sure the margins are set correctly in your software application.