Avanti IMP25 Kullanım Kılavuzu - Sayfa 12

Buz Yapıcı Avanti IMP25 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Avanti IMP25 19 sayfaları. Avanti products ice maker

? Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your ice
maker if you minimize the number of times the door is opened. If the power is going to be OFF for a
longer period of time, you need to take the proper steps to disconnect your appliance.
You can solve many common ice maker problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servi cer.
Problem
The compressor works
abnormally with a buzzing
Noise.
Water shortage indicator
Light is on.
Ice full indicator light is on.
Indicator lights are off.
The ice made is too large
and with pieces sticking
together.
Conditions for ice making
cycle are right but no ice is
made.
Both alert and ice full
indicators are on.
We are proud of our customer service organization and the network of professional service technicians
that provide service on your Avanti ice maker. With the purchase of your Avanti ice make r, you can be
confident that if you ever need additional information or assistance, the Avanti Products Customer
Service team will be here for you. Just call us toll-free.
Product information
800-323-5029
Part orders
800-220-5570
In -home repair service
800-220-5570

PROBLEMS WITH YOUR ICE MAKER?

TROUBLESHOOTING GUIDE

Possible Cause
The voltage is lower than
Recommended.
There is not enough water in the
reservoir.
Ice storage cabinet is full to the
top.
Blown fuse/ no power/blown
breaker
The water temperature in the
storage tray or ambient is too
low.
Refrigerant leaks/ sealed
system is blocked.
The water tray does not tu rn.

Service For Your Ice Maker

Avanti Products Customer Services
12
Suggested Solutions
Stop the ice maker and do not restart
until the voltage is normal.
Press the stop button, fill with water,
wait 3 minutes and press the start
button to restart.
Remove some of the ice .
Replace fuse / turn power on.
Stop the machine and reset the ice
making cycle. Restart the machine
after turning it off.
Replace unit.
Check for blocked ice cubes .
Whatever your qu estions are about our products,
help is available.
You may order parts and accessories that will be
delivered directly to your home, by personal
check, money order, master card, or visa.
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your ice maker inside and out.