Corsa 14864BLK Kurulum Kılavuzu
Otomobil Aksesuarları Corsa 14864BLK için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Corsa 14864BLK 7 sayfaları. Cat back exhaust system
Sayfayı YazdırPlease take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
3/8" drive ratchet
3/8" drive 13mm deep socket
3/8" drive 14mm shallow socket
3/8" drive 15mm deep socket
3/8" 4" ratchet extension
Small pry bar or flathead screwdriver
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Exhaust System Installation
Cat Back Exhaust System
Dual Rear Exit w/ 4.5" Pro-Series Tips
2012-15 Subaru BRZ & Scion FR-S
PN 14864 and 14864BLK
12mm wrench
13mm wrench
Grommet pullers
Soap and water solution
Torque Wrench
Penetrating lubricant spray
Safety glasses
Bill of Materials
1. 42BZ2000 – Tunnel Muffler Assembly
2. 42BZ2003 – Rear Muffler Assembly
3. 42BZ3000 – Driver Tip Assembly
4. 42BZ3001 – Passenger Tip Assembly
5. 42BZ4003 – Axle Pipe Assembly
6. 42BZ7006 – Hardware Kit