Lexmark 2480 - Forms Printer B/W Dot-matrix Hızlı Referans - Sayfa 14
Yazıcı Lexmark 2480 - Forms Printer B/W Dot-matrix için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark 2480 - Forms Printer B/W Dot-matrix 19 sayfaları. Tech notes
Ayrıca Lexmark 2480 - Forms Printer B/W Dot-matrix için: Başlangıç Kılavuzu (9 sayfalar), Kurulum Sayfası (2 sayfalar), Teknik Not (3 sayfalar)
Sayfayı Yazdır
Press this button:
Micro
Setup
Pitch
Note:
• Repeatedly pressing
Pitch rotates through
the printer pitch
selections. If you
continue pressing
Pitch through a
second pass, the pitch
selections are locked.
• This setting will be lost
when the printer is
powered Off and back
On.
Note: Some functions may not work when data is being processed and the
printer is online (Ready light is On).
When you want to...
Feed the paper downward in:
• 1/72-inch increments (2480/2481 models)
• 1/90-inch increments (2490/2491 models)
If you press and hold Micro , the paper
advances in micro movements and then goes into
continuous feed.
Use Micro
to adjust the Top-Of-Form.
Enter Setup mode. You can change the default
values and modes for printer operation.
Set the character pitch to: 10 cpi, 12 cpi, 15 cpi,
17 cpi, 20 cpi, or Proportional Spacing.
Note:
• On 2490/2491 models you can also select 24 cpi.
• Fast Draft supports only 10, 12, and 15 pitch.
14