HIKVISION ERI-Q108-P8 Hızlı Başlangıç Kılavuzu - Sayfa 6
DVR HIKVISION ERI-Q108-P8 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION ERI-Q108-P8 14 sayfaları. Eri-q10 series network video recorder
Sayfayı Yazdır
8
U S E R L O G O U T , S H U T D O W N , A N D R E B O O T
Log out, shut down, or reboot the device upon demand.
1. Go to Menu > Shutdown.
2. Click Logout, Shutdown, or Reboot.
After logging out, operations are invalid. Enter
user name and password to unlock the system.
9
N E T W O R K S E T T I N G S
Properly configure the network settings
before operating the NVR over a
network.
• General Network Settings
1. Go to Menu > Configuration >
Network > General.
2. Configure the general network
parameters.
3. Click Apply to save the settings.
4. Check the Enable DHCP
checkbox.
5. Press Refresh to update the IPv4 address, subnet mask, and IPv4 default gateway.
6. Disable DHCP (uncheck the checkbox).
7. Change "Preferred DNS Server" value to 8.8.8.8 (leave Alternate DNS Server blank).
• Set Remote Viewing Ports
After assigning the IP information, click the More Settings tab.
The More Settings tab contains the ports that need to be forwarded for remote access.
GENERAL TAB
NIC TYPE (Not changeable)
ENABLE DHCP
Check box to have router assign IP
address (optional)
IP V4 ADDRESS
PREFERRED DNS SERVER
Default is 8.8.8.8
ALTERNATE DNS SERVER
Leave blank