HIKVISION HiLook Series Kullanıcı Kılavuzu - Sayfa 12

DVR HIKVISION HiLook Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION HiLook Series 18 sayfaları. Smart hybrid light bullet & turret camera
Ayrıca HIKVISION HiLook Series için: Hızlı Başlangıç Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (17 sayfalar)

Figure 2-22 Fix the Camera onto Junction Box Cover

7. Secure the junction box body on the wall with four

PA4 × 25 screws.

Figure 2-23 Secure the Junction Box Body

8. Route the cables through the bottom cable hole or

the side cable hole of the junction box and connect

the cables.

9. Combine the junction box cover with its body with

the four screw on the cover.

Figure 2-24 Combine Junction Box Cover with Body

10. Refer to steps 7 and 11 of 2.2.1 Ceiling Mounting

Without Junction Box to adjust the angle and finish

installation.

2.2.3 Wall Mounting

Before you start:

You need to purchase a wall mount in advance.

Steps:

1. Drill Φ 10 mm screw holes in the wall where you

want to install the wall mount.

2. Use four M6 expansion bolts to fix the wall mount

onto the wall.

3. Turn the trim ring counterclockwise to remove it

from the camera.

Figure 2-25 Fix the Wall Mount