HIKVISION HiLook Series Kullanıcı Kılavuzu - Sayfa 9

DVR HIKVISION HiLook Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION HiLook Series 18 sayfaları. Smart hybrid light bullet & turret camera
Ayrıca HIKVISION HiLook Series için: Hızlı Başlangıç Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (17 sayfalar)

3. Loosen the screw and pull out the clip plate to

dissemble the camera.

Figure 2-10 Dissemble the Camera

4. Use three M4 screws to fix the mounting base onto

the wall mount.

Figure 2-11 Fix the Mounting Base onto the Wall Mount

5. Refer to steps 5 to 8 of 2.1.1 Ceiling Mounting

without Junction Box to finish the installation.

2.2

Installation of Type II Camera

2.2.1 Ceiling Mounting Without Junction Box

Steps:

1. Paste the drill template (supplied) to the place

where you want to install the camera.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

4. Turn the trim ring counterclockwise to remove it

from the camera.

Figure 2-12 Finish Installation

Figure 2-13 Drill Template