HIKVISION HiLook Series Kullanıcı Kılavuzu - Sayfa 11

DVR HIKVISION HiLook Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION HiLook Series 17 sayfaları. Smart hybrid light bullet & turret camera
Ayrıca HIKVISION HiLook Series için: Hızlı Başlangıç Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (13 sayfalar)

3. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall plugs.

4. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

5. Secure the junction box body on the ceiling with three

or four PA4 × 25 screws according to the actual object.

6. Fix the camera to the junction box.

 For Type III camera:

 For Type IV camera:

PM4

Installation Plate

Figure 2-8 Fix the Camera to the Junction Box Cover

Figure 2-9 Fix the Junction Box Cover and Junction Box

7. Route the cables through the bottom cable hole or

the side cable hole of the junction box.

8. Refer to step 5 of 2.2.1 Ceiling Mounting without

Junction Box to adjust the angle and finish the

installation.

2.2.3 Wall Mounting

Before you start:

You need to purchase a wall mount in advance.

Steps:

1. Drill Ø10 mm screw holes in the wall where you want

to install the wall mount.

2. Use four M6 expansion bolts to fix the wall mount

onto the wall.

3. Use three PM4 screws to fix the installation plate onto

the wall mount.

Figure 2-10 Fix the Wall Mount

Body