JAMO DMR 70 Kullanıcı Kılavuzu - Sayfa 13

Alıcı JAMO DMR 70 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. JAMO DMR 70 16 sayfaları. Jamo dvd receiver brochure
Ayrıca JAMO DMR 70 için: Teknik Özellikler (1 sayfalar)

Sayfayı Yazdır

Video Setup

TV TYPE

TV DISPLAY

PROGRESSIVE

HDMI SETUP

COMPONENT

Select the colour system that matches your TV. This also al-

lows playback of a disc that uses a different video standard

(PAL or NTSC).

• PAL - For PAL-system TV.

• NTSC – For NTSC-system TV.

• Multi – For TVs that are compatible with both PAL and NTSC.

If TV Type should be changed, HDMI setting has to be "off".

HDMI is "on" by default.

Allows you to select the aspect ratio that is appropriate for

your TV display.

• 4:3 Pan Scan

If you have a conventional TV set and

would like to see the DVD picture fill

your TV screen then use this setting. A

wide picture is displayed on the whole

TV screen with a portion automatically

out off.

• 4:3 Letter Box

If you have a conventional 'square' set

and would like to see the DVD picture

in its full format, use this setting. Wide

bands will be displayed on the upper

and lower portions of the TV screen.

• 16:9 Wide Screen

If you have a widescreen TV set, use this

setting (you must also set your wide-

screen TV to its 16:9 mode.).

Progressive Scan displays twice the number of frames per

second than interlaced scanning (ordinary normal TV sys-

tem). With nearly double the number of lines, progressive

scan offers higher picture resolution and quality.

Progressive is "off" by default. Component setting has to be

set to "YPbPr" if Progressive should be set to "on"

Warning: Ensure that you have connected this unit to a pro-

gressive scan TV using the YPbPr connection.

In HDMI setup you can turn the HDMI out On and Off and it is

possible to set-up the resolution.

For PAL-System TV one of following settings is available:

576p (720), 720p (50 Hz), 1080i (50 Hz)

For NTSC-System TV one of following settings is available:

480p (720), 720p (60 Hz), 1080i (60 Hz)

For the best picture quality the settings should be the high-

est possible of your TV.

Warning: If a higher resolution chosen than the TV can

handle, - then the screen will be "blue". Connect your video

cable and restore settings.

Select the component output colour system that matches

your TV: YPbPr, RGB.

Default setting: EUR = RGB – Other = YPbPr

If component should be changed, HDMI setting has to be

"off". HDMI is "on" by default.