HIKVISION HWD-5108MS Hızlı Başlangıç Kılavuzu - Sayfa 12

DVR HIKVISION HWD-5108MS için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION HWD-5108MS 18 sayfaları.

: If the DVR detects the power consumption of the PoC camera is higher than the allowed

maximum power of DVR PoC module, it will stop power supply to the camera, and the camera status

becomes grey.

Step 3 Check the connected AF or AT camera number and the connectable camera number.

 Only Hikvision PoC camera is supported.

 The maximum connectable AT/AF camera number varies with different models.

 Do not unplug or plug the PoC camera if it is powered by the external power supply.

3.9 Network Settings

3.9.1 Configuring General Settings

Purpose

Network settings must be properly configured before you operate DVR over network.

Step 1 Go to Menu > Configuration >

Network > General.

Step 2 Configure the general parameters of

network.

Step 3 Click Apply to save the settings.

3.9.2 Configuring Hik-Connect

Purpose

Hik-Connect provides the mobile phone application and the service platform page (www.hik-connect.com) to

access and manage your connected DVR, which enables you to get a convenient remote access to the

surveillance system.

The Hik-Connect can be enabled via operation on SADP software, GUI and Web browser. We introduce the

operation steps on GUI in this section.

Step 1 Go to Menu > Configuration > Network >

Platform Access.

Digital Video Recorder Quick Start Guide

Figure 3-9 Network Settings

Figure 3-10 Hik-Connect Settings