Lexmark 260d - E B/W Laser Printer Hızlı Referans - Sayfa 9
Yazıcı Lexmark 260d - E B/W Laser Printer için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark 260d - E B/W Laser Printer 10 sayfaları. Setup sheet
Ayrıca Lexmark 260d - E B/W Laser Printer için: Kurulum Sayfası (2 sayfalar)
Sayfayı Yazdır
Paper jammed in the manual feeder can usually be grasped and
pulled straight out. If the jam cannot be removed this way, check
for jammed paper behind the photoconductor kit and toner
cartridge unit. For more information, see "Clearing jams behind
the photoconductor kit and toner cartridge" on page 7.
Clearing jams behind the rear
door
If the paper is exiting the printer, pull the paper out. If the paper
is not exiting the printer:
1
Push the release button, and then lower the front
door
.
2
Pull open the rear door.
The paper may be jammed with one end caught in the
standard exit bin.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
3
Remove the jammed paper.
4
Close both the front and rear doors.
5
Press
to continue printing.
Clearing jams
9