AIRFUSION LD-CD52BN/BC Manuel - Sayfa 4
Fan AIRFUSION LD-CD52BN/BC için çevrimiçi göz atın veya pdf Manuel indirin. AIRFUSION LD-CD52BN/BC 19 sayfaları.
Sayfayı Yazdır
Unpack your ceiling fan carefully. Remove all parts and hardware. Place fan motor on a cloth or soft surface
to avoid damage to the finish. Do not lay motor housing on its side –the decorative housing may become
bent or damaged. Verify that all parts are present before starting assembly.
Check the packaging carefully for missing parts.
Examine all parts. You should have the following:
1.
mounting bracket x 1
2.
Fan assembly with hanger cover, down rod,
canopy cover and canopy x 1
3.
Blades x 4
4.
Blade holder x 4
5.
Blade holder kit x 4
6.
Bottom cover x 1
7.
Remote transmitter with holder x 1 set
4
BEFORE INSTALLATION
Fig. 1
8.
Remote receiver x 1
9.
Extra Motor screws x 1 (not shown)
10. Blade screws x 13 (not shown)
11. Wooden screw x 2 (not Shown)
12. Balancing kits x 1 set (not shown)
13. Wiring nuts x 4 (not shown)
14. Screw for remote holder x 2 (not shown)
15. 12V Battery for remote x 1 (not shown)