Avantree BTHT-4186 Kullanıcı Kılavuzu

Kulaklık Avantree BTHT-4186 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantree BTHT-4186 2 sayfaları. Bluetooth transmitter and headphone set

Sayfayı Yazdır

Bluetooth Transmitter and

Headphone set

Model No: BTHT-4186

IMPORTANT NOTICE

step-by-step video tutorial

*Please watch

from

avantree.com/ht4186/video

No need to pair! Units auto-reconnect each time they're turned on!

Any questions? Contact:

[email protected]

(Response Time: 1 working day)

Self-service Support:

•

More FAQs on support.avantree.com

• 100+ Step by step video Guide – youtube.com/avantree/playlists

Telephone Support (Mon-Fri):

• USA / CANADA +1 800 232 2078 (EN, PST 9am-5pm)

• EU / Asia telephone No. refer to http: //www.avantree.com/contact-us

What's in the box.

HT 4186

Audikast Plus

Optical

3.5mm

BT Headphones

BT Transmitter

Audio Cable

Product overview

Audio input indicators

Codec indicators

USB

AUX

OPT

for HT4186 headphone

for 2nd headphone

SBC

APTX

Bluetooth status

indicator for

How to use

NOTE: How do I wear these earphones? Please search for "HT4186" on support.avantree.com

User Manual

Bedienungsanleitung

Check your TV/Audio Source output options

Mode d'emploi

Manuale di Istruzioni

I T

Manual de Usuario

Jack

Options

Natively

Supported?

Please refer

before installation.

to Point:

Turn on Transmitter and Headphones

2.1 Powering up transmitter

Powering up the transmitter with the USB cable provided. Connect it to a TV USB

port or any other USB charger that supports 5V/500mA-2A.

2.2 Turn on both devices

Turn on the transmitter - Slide on/off switch to "ON" position,

BLUE

Model No:BTHT-4186-BLK

Turn on the headphones - Press and hold

Dispose of the packaging and

sight of

this product in accordance with

the latest provisions.

They will auto-reconnect, indicators are: 1) Headphones say " Your device is

connected". 2)

Z-PKQG-4186-F-V2

BLUE.

Connect Transmitter to your TV/audio source

NOTE: How to use these with my PC? Please search for "HT4186" on support.avantree.com

3.1 Optical Audio Out

3.5mm to RCA

Micro USB

Audio Cable

Power Cable

Now, you should be able to hear sound from headphones, if no sound:

a. Ensure your TV Speaker is set to"External Speaker"

b. Ensure TV Audio Format is set to"PCM"or turn o "Dolby/DTS"(This is IMPORTANT)

C. Ensure the sampling rate of audio source is not more than 16bit/48KHz.

O FF

O N/

Fig 3-2 Set TV speaker to "External Speaker"

A L

TI C

O P

ON/OFF

Note: Unplug any devices from the 3.5mm AUX jack while using the OPTICAL output.

for FAQ and video guides.

RCA jacks

Other RCA

Optical

AUX/3.5mm

labeled

jacks (usually

OUT

"AUDIO OUT"

audio IN)

3.1

3.2

3.3

N/A

Fig 1-1 Output options

once per 2 seconds.

for 3 seconds until you see the first

BLUE

light.

close to

on the transmitter and LED on headphones turn SOLID

for FAQ and video guides.

Micro USB power cable

OPTICAL

Optical audio cable

Fig 3-1 Set up Audikast Plus using optical audio out

Speakers

Settings

Internal speakers

PCM

External speakers

Dolby Digital

Audio Format

DTS

Headset

DTS Neo 2:5

Fig 3-3 Set TV Audio Format to "PCM" (IMPORTANT)

3.2 AUX/3.5mm Audio Out

Micro USB power cable

Big Phone

Jack

Speakers

Internal speakers

External speakers

Headset

3.4

3.3 RCA Audio Out (Red/White ports labeled "AUDIO OUT ")

close to

flashes

AUX/3.5 mm audio cable

Now, you should be able to hear sound from headphones, if no sound:

a. Ensure use TV Red/White ports labeled "AUDIO OUT", other Red/White ports are

incorrect.

b. Ensure your TV Speaker is set to "External Speaker"

Fig 3-7 Use the right RCA ports

3.4 Receiver with 6.35mm Phone Jack at Front

Micro USB power cable

Note: Do NOT use the RCA ports on the back of an AV receiver. These are not suitable

and will not work or could even permanently damage your Audikast product!

AUX/3.5mm

AUX/3.5 mm audio cable

Fig 3-4 Set up Audikast Plus using AUX/3.5mm audio out

Now, you should be able to hear sound from headphones,

if no sound, ensure your TV speaker is set to "Headset".

Fig 3-5 Set TV speaker to "Headset"

AUDIO OUT

Micro USB power cable

AUDIO OUT

3.5mm to RCA audio cable

Fig 3-6 Set up Audikast Plus using RCA audio out

Speakers

Internal speakers

External speakers

Headset

Fig 3-8 Set TV speaker to "External Speaker"

PHONES

6.35mm to

3.5mm Converter (purchase separately)

3.5mm audio cable

Fig 3-9 Set up Audikast Plus using 6.35mm phone jack