Avantree BTTC-418-P Kullanıcı Kılavuzu - Sayfa 4

Verici Avantree BTTC-418-P için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantree BTTC-418-P 8 sayfaları. Bluetooth transmitter

TVs with OPTICAL audio out

After connecting your optical cable as above, go to your TV audio settings and change your "audio

format" to "PCM". Usually, now the "OPT" indicator on the Audikast Plus will change to SOLID WHITE,

and now you should be able to hear your TV/audio source through your headphones.

If not:

1) Ensure that your TV Speaker is set to "External Speaker."

2) Ensure that your TV's "DOLBY/DTS" is set to OFF (NOT auto.)

3) Ensure the audio cable is good and fully plugged.

PCM

Dolby Digital

Audio Format

DTS

DTS Neo 2:5

Set TV Audio Format to

"PCM" (IMPORTANT)

Note:

Please make sure that you keep the 3.5mm AUX jack "vacant" while using the OPTICAL out. (If any-

thing is plugged into the AUX jack, the transmitter will default to the AUX signal and ignore any OPTI-

CAL input.)

Speakers

Internal speakers

External speakers

Headset

Set TV speaker to

"External Speaker"

DOLBY/DTS

OFF

Set "DOLBY/DTS" to OFF