Alicat Scientific EPCD Series Kullanım Kılavuzu - Sayfa 7
Kontrolör Alicat Scientific EPCD Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Alicat Scientific EPCD Series 17 sayfaları. Pressure vacuum controller
Sayfayı Yazdır
Power and Signal Connections
Power and communications are supplied through the 6 pin Molex Micro-Fit
3.0 connector:
Pin
Function
1
Power in
2
0–5 Vdc
Optional: 1–5 Vdc or 0–10 Vdc output signal
3
Ground (common for power, digital
communications, and analog signals)
4
Serial RS-232TX output signal
Optional: RS-485 B
5
Serial RS-232RX input signal
Optional: RS-485 A
6
Analog setpoint input
Caution: Do not apply power to pins 2, 4, 5, or 6. Permanent damage can occur.
RS-232 or RS-485 Digital Signals
To use the RS-232 or RS-485 input signal, connect the RS-232 / RS-485 Output
Signal (Pin 4), the RS-232 / RS-485 Input Signal (Pin 5), and Ground (Pin 3) to
your computer serial port as shown below.
DB9 to MF6 Connection for RS-232 or RS-485 Signals
9-Pin Serial Connection
Pin
Function
5
Ground
3
Transmit
2
Receive
MF6 Connection
Pin
Function
3
Ground
5
Receive
4
Transmit
7