Lexmark 350 Manuel - Sayfa 12

Yazıcı Lexmark 350 için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark 350 13 sayfaları. Setup solutions
Ayrıca Lexmark 350 için: Kullanıcı Kılavuzu (2 sayfalar), Kurulum Talimatları (2 sayfalar)

Sayfayı Yazdır
Lexmark 350 Manuel
5
Plug the power supply cord into the wall outlet.
6
Press
to turn the printer back on.

Cannot print from digital camera using PictBridge

S
1
OLUTION
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital
camera documentation.
S
2
OLUTION
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
S
3
OLUTION
Use only the USB cable that came with the camera.
S
4
OLUTION
Remove the memory card or the flash drive from the printer.

Removing and reinstalling the software

If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to remove and reinstall the printer software.
1
Click Start
Programs or All Programs
2
Select Uninstall.
3
Follow the instructions on the computer screen to remove the printer software.
4
Restart the computer before reinstalling the printer software.
5
Click Cancel on all New Hardware Found screens.
6
Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Lexmark 350 Series.
12