Avantree BTHS-AH6 Kullanıcı Kılavuzu - Sayfa 5

Kulaklıklar Avantree BTHS-AH6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantree BTHS-AH6 10 sayfaları. Stereo wireless headset
Ayrıca Avantree BTHS-AH6 için: Kullanıcı Kılavuzu (9 sayfalar)

Sayfayı Yazdır
When the LED ashes RED 3 times per 10 seconds or you hear the voice prompts "Low battery please turn o and
charge", you should fully recharge the device for about 1 hour. The headset can be charged with the desktop
charging stand (DC5V/0.5-1A) or with the micro USB cable (DC5V/0.5-1A).
•
Charged with the desktop charging stand – The LED indicator on the charging stand will remain WHITE while
charging and turn to
GREEN
•
Charged with the micro USB cable - The LED indicator on the headphones will remain
turn o when charging is complete.

Clear pairing history

If you have issues with the audio stream skipping or cutting out when using Avantree AH6, please try to clear pairing
history as following:
Firstly, turn on the headset (Non-calling Status), then Tap and Hold BOTH
for 2 seconds, then the headphones enter into PAIRING MODE automatically.

Frequently Asked Questions

1. No Sounds
There are FOUR possibilities if the headset seems no sounds
•
Headphones and your Bluetooth audio device are not properly paired / connected
•
PC/Laptop's current default output is not set as this headset.
•
The headphones volume is too low to be heard.
•
Headset is a defective unit.
For more detailed settings please search "Avantree AH6" on "support.avantree.com" or contact
2. Can this headset be used with TV/ PC?
Yes, it can, for more detailed step by step instructions please search "Avantree AH6 TV/PC" on "support.avantree.com"
or contact [email protected] directly.
3. Audio delay
To take advantage of the better performance of aptX Low Latency codec please make sure your Bluetooth devices/
transmitters support the aptX Low Latency codec. If the Bluetooth devices/ transmitters only support the normal aptX
codec, SBC or aptx-HD, these codec will be used instead, that's why you still experience an audio delay/lip-sync delay.
4. Poor sound quality
To take advantage of the better sound quality of its aptx-HD codec please makes sure your Bluetooth devices/
transmitters support the aptX-HD codec.
WARNINGS / CAUTIONS
• Permanent hearing loss may result from long-term exposure to sound at high volumes.
• This product contains small parts which may be a choking hazard. Not suitable for children under age 3.
• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
• Do NOT make unauthorized alterations to this product.
• Do NOT expose products containing batteries to excessive heat (e.g. direct sunlight, fire, etc.).
• Do not leave a fully charged battery connected to a charger; overcharging may shorten its life. Declaration of
Conformity.
when charging is complete.
RED
while charging and
&
5 seconds till the LED blinks PINK
4