Avantree AS70 Kullanıcı Kılavuzu - Sayfa 3

Alıcı Avantree AS70 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantree AS70 4 sayfaları. Wireless audio receiver for wired headphones

Sayfayı Yazdır

Status of LED Indicator

Bluetooth

Pairing

Connected via aptX-HD

Connected via aptX-Low Latency / FastStream

Connected via aptX

Connected via SBC

Disconnected

Battery

Low battery

Charging

Charging complete

Connect to a Bluetooth device

1. Enter the AS70 into PAIRING MODE –Slide

position and hold it there for 2 seconds. The LED indicator will start flashing

a device plugged into it, you'll hear"pairing. "

2. On your device - Activate Bluetooth,search & select "Avantree AS70" to connect. If you are using a Bluetooth

transmitter, enter your transmitter into Bluetooth PAIRING Mode.

3. Once connected, the LED indicator will either flash

have a device plugged into it, you'll hear "connected. "

Connect to two Bluetooth devices simultaneously

1. Connect the AS70 to the FIRST device as shown above.

2. Enter the AS70 into PAIRING MODE again and repeat steps 2 & 3 above to connect to the SECOND device.

Note: This feature only works for two mobile devices, such as cellphones and tablets. It doesn't work for PCs or

Bluetooth transmitters.

Reconnect to Bluetooth device

Once powered on, the AS70 should automatically reconnect to the most recently connected device within 5-10

seconds. If it doesn't, please either slide the power on/off/pair switch to the position ONCE or select "Avantree

AS70" from your device's Bluetooth menu to connect manually. (If you're using a Bluetooth transmitter, please

refer its user manual.)

Flash

BLUE

RED

quickly

Triple-flash

BLUE

every 5 seconds

Solid

BLUE

Flash

BLUE

2 times every 5 seconds

Flash

BLUE

1 time every 5 seconds

Flash

BLUE

1 time every 10 seconds

Flash

RED

Solid

BLUE

Solid

to turn on the AS70, then slide the switch to the

BLUE

SOLID BLUE

or become

RED

alternately.If you have

(see chart above.) If you