Jands StageCL Hızlı Başlangıç Kılavuzu - Sayfa 11

Kontrol Paneli Jands StageCL için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Jands StageCL 16 sayfaları. Led lighting control through

Sayfayı Yazdır

Saturation controls

Pressing the Saturation encoder toggles the selected fixtures from full

saturation (full colour) to zero saturation (white).

Select buttons

If you want to adjust the colour of more than one fixture, press the select

button on all the fixtures you want to change. Then adjust the Hue and

Saturation controls on any of the selected fixtures.

To select a range of channels hold down the first fixture's select button while

pressing the last fixture's button.

If you select some fixtures then adjust their colour, those fixtures are

automatically de-selected when you select a new fixture.

Clear

Press the Clear button to set the colour of all selected fixtures to white.

Double-click the Clear button to set the colour of all fixtures to white – even if

they're not selected. Triple-click to clear all fixture colours and intensities.



Holding Clear and pressing either a Scene or Chase button clears that Scene

or Chase.

Shift

To fan the colours of all selected fixtures press the Shift button and adjust a

Hue Control. The fan effect will depend on which Hue control you adjust. eg:

If you have all 12 fixtures selected and adjust the Hue control on Fixture 1 the

fan will spread from Fixture 12, which does not change colour, to the colour you

set on Fixture 1.

If you adjust the Hue control on Fixture 6 the fan will spread from Fixture 1 and

Fixture 12, which do not change colour, inwards to Fixture 6.

Scene and Chase Controls

Buttons 1, 2, 3, 4

These buttons are used to activate / deactivate the any scene or chase stored

there. They're also used for record the Scene or Chase – see section 5.