HIKVISION N9616I12T Hızlı Başlangıç Kılavuzu - Sayfa 3
DVR HIKVISION N9616I12T için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION N9616I12T 17 sayfaları.
Sayfayı Yazdır
F R O N T P A N E L ( c o n t i n u e d )
No.
Item
1.
Status Indicators
2.
IR Sensor
3.
Front Panel Lock
4.
DVD Bay
5.
Number Buttons
6.
USB Ports
7.
Function Buttons
8.
Direction Buttons
9.
Enter
10.
Scroll Wheel
11.
On/Off Power
R E A R P A N E L
No.
Name
1
Audio In
2
RS-232 Interface
3
RS-485
4
KB
5
Alarm Out
6
Power Input
7
Power Switch
8
LAN1/LAN2 Interface
9
Audio Out
10
HDMI2
11
VGA2
12
VGA1
13
HDMI1
14
USB 3.0 Interface
15
eSATA
16
SW
17
Alarm In
18
GROUND
Description
Ready
Flickers red when data is being read from or written to HDD
HDD
Blinks red when data is being read from/written to HDD
Tx/Rx
Blinks blue when network connection is functioning properly
For remote control
Locks access to hard drives
For DVD drive
To enter numbers
Connects USB mouse or USB flash memory devices
Use to access device functions
Right
Move right
Down
Move down
Left
Move left
Up
Move up
Confirms menu selection. Ticks checkbox fields. In Playback mode, plays or pauses
video. In Single Play mode, advances video a single frame.
Use to scroll through selections
Glows blue when device is on, red when powered off and in standby mode
Figure 2, DS-9616NI-I8 Rear Panel
Description
RCA connector for audio input
Connector for RS-232 devices
Half-duplex connector for RS-485 devices
Connector for keyboard
Connector for alarm outputs
110 to 240 VAC power
Switch for turning the device on/off
Network interfaces
RCA connector for audio output
HDMI video output connector
DB-15 connector for VGA output. Display local video output and menu.
DB-15 connector for VGA output. Display local video output and menu.
HDMI video output connector
USB port for additional device (e.g., USB mouse or USB HDD)
Connector to external eSATA drive
RS-485 end-of-line termination switch
Connector for alarm inputs
Ground (needs to be connected when NVR starts up)