Jandy AquaPure Ei Series Manuel - Sayfa 7

Su Filtrasyon Sistemleri Jandy AquaPure Ei Series için çevrimiçi göz atın veya pdf Manuel indirin. Jandy AquaPure Ei Series 8 sayfaları. Replacement kits for models apure35plg / 35plgc
Ayrıca Jandy AquaPure Ei Series için: Talimatlar (4 sayfalar)

Sayfayı Yazdır
Jandy AquaPure Ei Series Manuel
G. Testing the Connection
Once the power pack has been wired to the AquaLink
RS Control System or PDA, follow these steps to test
the connection:
1. Apply power to the power pack and the AquaLink
RS Control System or PDA.
2. Wait about 20 seconds. If the connection was
successful, a Ŧ symbol will appear in the top right
corner of the power pack display.
NOTE If the power pack does not connect to the
controller, turn the power off to both devices
and repeat steps 1 and 2. If the power pack
still does not connect to the controller, re-check
the wiring connections (see Figure 10) and the
controller setting on the power pack
(see Section 4.D).

5. Parts List

The following table is for your reference. To order
additional parts, please contact your local Jandy
Distributor.
Description
Power PCB Assembly
Controller PCB Assembly
Output Cable Assembly
Power Pack Covers
Control PCB Mounting Screws
Power Supply Cover Screws
Jandy
Pro Series AquaPure
Ei™ Series
®
®
1
--
--
--
--
1
--
--
1
--
--
--
--
--
1
--
--
1
--
--
1
--
--
--
|
Replacement Kit Instructions
Page 7