HIKVISION 1200KI Kullanım Kılavuzu - Sayfa 2

Ağ Donanımı HIKVISION 1200KI için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. HIKVISION 1200KI 9 sayfaları. 485 control back-end gui4.0

How to use 1200KI & 1006KI 485 control back-end GUI4.0

This document is intended to introduce the method of how to use 1200KI & 1006KI 485

control back-end GUI4.0 (NVR version 4.21.000 is recommended). We will start from hardware

connection

1. Connect keyboard RS-485 to back-end KB interfaces, T+ to D+, T- to D- through twisted pair.

Note only back-end with KB interface on rear panel could be controlled by 485 keyboard

(485 interface on NVR/DVR is for backend to control analog PTZ)

2. Configure Back-end Device No, this number ranges from 0-255( 0 is not recommended, it

mean control all), you can configure on backend GUI or web interface

3. Login keyboard, use FOCUS+/A button to switch between number, capital and lower case

letters. (You can choose remember password on your next login)

How to use 485 control back-end GUI4.0