HIKVISION DS-3WF Series Hızlı Başlangıç Kılavuzu - Sayfa 9

Ağ Donanımı HIKVISION DS-3WF Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION DS-3WF Series 20 sayfaları. Wireless bridge

Sayfayı Yazdır

Preparation for Installation

To avoid device damage or personal injury caused by improper usage of the device, please follow

the preparations below.

 Use the attached power adapter and PoE injector to power the device.

 The distance between the AP and the CPE should be less than the suggested distance to secure

transmission rate.

 At least 2 m distance should be kept between two adjacent devices.

 Install the device in the place where the maintenance personnel can operate easily.

 The devices should be installed face to face and the max. angle of deviation is 30°.

 Disconnect the power supply when you have the device serviced.

 The temperature of the cover area will be high when the device is working. In the circumstances,

only personnel with relevant professional knowledge, such as installation and maintenance

personnel, are allowed to operate the device.

AP Installation

The AP device can be magnetically mounted or mounted by using a wall mount bracket. It is

recommended to mount the device magnetically.

Attach the back magnet of the AP device to the steel surface of the machine room, to keep the

device installed horizontally. The following two diagrams are for your reference.

Chapter 2 Installation & Connection

Magnetic Mounting Manner 1