23
Remove the duplex tray.
Access doors and trays
The following illustrations show areas in the printer where jams can
occur.
Multipurpose feeder
250 Paper Jam
Left access door
24
Remove any jams and then reinstall the tray.
(beside tray 1)
25
Make sure all printer covers, doors, and trays are closed.
200 Paper Jam
Press Go to resume printing.
500-sheet drawer
24x Paper Jam
2000-sheet drawer
24x Paper Jam
Clearing fuser jams
1
Clear the paper path. If the jam error message persists, go on
to step 2.
2
Open both the upper right and the lower right access doors.
Front
Mailbox
access door
27x Paper Jam
201 Paper Jam
Upper right
access door
(redrive area)
201 Paper Jam
Standard tray
202 Paper Jam
(Tray 1)
Lower right
200 Paper Jam
access door
(fuser area)
Duplex
201 Paper Jam
mechanism
202 Paper Jam
230 Paper Jam
CAUTION!
500-sheet tray
24x Paper Jam
Duplex tray
230 Paper Jam
3
Pull down the latches. They slide toward the center to release
the fuser.
2000-sheet tray
24x Paper Jam
4
Pull the fuser out of the printer, and set it on a clean flat
surface.
5
Unsnap the housing and set it aside.
6
Lift up the fuser roller cover and remove the jam.
The fuser assembly may be hot. Let it cool
before continuing.
7
Close the fuser roller cover.
8
Snap the housing back onto the fuser.
9
Insert the fuser back into the printer.
10
Slide the latches out, and then pull up to refasten them.
11
Close the doors.
Clearing image transfer unit jams
For information about clearing this type of jam, launch the Lexmark
C750 Publications CD, click Troubleshooting, and look for
Clearing image transfer unit jams.
Clearing mailbox jams
1
Open the rear door of the 5-bin mailbox.
2
Pull the jam straight out, and then close the door.
If you still need help
1
Turn the printer off and then back on.
2
Contact your administrator or Help desk if you need more
assistance.
Sayfayı Yazdır