Jandy Jandy Pro Series Kullanıcı El Kitabı - Sayfa 7

Su Pompası Jandy Jandy Pro Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Jandy Jandy Pro Series 12 sayfaları. Single element cartridge pool & spa cs filters
Ayrıca Jandy Jandy Pro Series için: Kurulum Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum ve Kullanım Kılavuzu (20 sayfalar), Kurulum Talimatları (2 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar)

Nicheless Underwater LED Lights | Owner's Manual

Figure 3.

Attach the assembled light and cable to the docking ring

Section 3.

Pro Series Nicheless LED Lights

NOTE The Jandy Pro Series Nicheless LED Lights are not compatible

with light dimmers. Do not wire the Jandy Pro Series Nicheless

Lights to any dimming circuitry.

To the extent allowed by local installation codes in effect in the installation

jurisdiction and capacity of the electrical equipment, multiple Jandy Pro

Series lights may be controlled with a single switch and transformer so

their colors may be synchronized.

Separate switches may be used to control the on/off and color functions

of each set of Jandy Pro Series Nicheless Lights (a 'set' being all the

lights wired to a common 12 VAC transformer). It is recommended that

these switches be located next to each other to facilitate simple color

synchronization when desired. If color synchronization is critical, switches

must be operated simultaneously.

3.1

Wiring to an AquaLink

The Jandy Pro Series Nicheless LED Lights can be controlled by an

AquaLink controller. Connect the transformer powering the lights to one

of the auxiliary relays in the AquaLink.

Refer to Figure 4 to connect the Jandy Pro Series Nicheless LED Lights to

the Power Center.

Wiring Options for Controlling Jandy

ENGLISH

Controller

Page 7