Jandy Jandy Pro Series Kullanıcı El Kitabı - Sayfa 14

Yüzme Havuzu Filtresi Jandy Jandy Pro Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Jandy Jandy Pro Series 20 sayfaları. Single element cartridge pool & spa cs filters
Ayrıca Jandy Jandy Pro Series için: Kullanıcı El Kitabı (12 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (20 sayfalar), Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum ve Kullanım Kılavuzu (20 sayfalar), Kurulum Talimatları (2 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum ve Kullanım Kılavuzu (16 sayfalar)

Page 14

2. The lights have memory. If the lights are off for 10 seconds or more, the

next time the lights are turned on, they will go to white for approximately

10-15 seconds and then return to the last color mode they were on

prior to being turned off. This function allows you to keep your lights

returning to your favorite color mode every time the lights are turned

back on.

NOTE To synchronize colors on multiple S-Series Nicheless Underwater

LED Light systems wired to separate switches, perform the

above actions on all of their switches simultaneously. All S-Series

Nicheless Underwater LED Lights will synchronize automatically if

activated by the same switch. No other accessories are required.

Section 7.

7.1

1. Turn the light ON. The lights will first come on white for 15 seconds and

then return to the color mode it was on prior to being turned off.

2. H-Series Lights may be operated independently or together depending

upon the initial installation of your lights. All H-Series lights that are

wired to the same 12V Transformer/Switch will synchronize their

operation of the 17 Color modes. If they do get out of sync, turn the

switch on then back off - wait between 6 and 9 seconds and turn the

switch back on. They should now all be in position #1.

7.2

1. To move to the next color mode, turn the lights off for 1-3 seconds and

turn back on. Repeat until desired color mode is found.

Example: If you are now on Deep Blue and want the lights to be White, then the

lights must be turned off and on 5 times to bring you to White.

ENGLISH

H-Series Nicheless Underwater

LED Light Operating Instructions

Nicheless Underwater LED Lights | Owner's Manual