Gardena 14620 Operatör El Kitabı - Sayfa 5

Çim Biçme Makinesi Gardena 14620 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Gardena 14620 8 sayfaları. Battery lawnmower

Sayfayı Yazdır

3. Connect the battery charger

(C)

4. Slide the battery charger

(C)

onto the battery

When the battery charge indicator

the battery is being charged.

When the battery charge indicator

permanently green the battery is completely charged

(Charging time, see 7. TECHNICAL DATA).

5. Examine the charge status regularly while you charge.

(B)

6. When the battery

is completely charged, you can disconnect the

battery

(B)

from the charger

(C)

Meaning of the indication elements:

Indication on the charger [ Fig. O3 ]:

Flashing of the battery

The charging procedure is indicated by flashing of the battery charge

(Lc)

charge Indicator

indicator

Note: The charging procedure is only possible when the battery

temperature is within the allowable charging temperature range,

see 7. TECHNICAL DATA.

Continuous lighting

Continuous lighting of the battery charge indicator

of the battery

the battery is fully charged or that the temperature of the battery is

(Lc)

charge indicator

not within the allowable charging temperature range and can therefore

not be charged.

When the battery is not inserted, continuous lighting of the battery

(Lc)

charge indicator

socket outlet and that the battery charger is ready for operation.

Battery charge status indication

After starting the product, the battery charge status indication

is displayed for 5 seconds.

Battery charge status

67 – 100 % charged

34 – 66 % charged

11 – 33 % charged

0 – 10 % charged

If the LED

(L1)

flashes green, the battery must be charged.

If the error LED

(Wp)

is illuminated or flashing, see 6. TROUBLESHOOTING.

Work positions:

The product is provided with a safety device to prevent it from

being switched on in the position at working interruption and

transport position.

Working position

(W)

approx. 22° – 70° [ Fig. O5 ]:

In order for the mower to be started, the tube

working position

(W)

(approx. 22° – 70°).

For safety reasons, the mower stops automatically when the tube

moved out of the working position

Parking position

(P)

approx. 70° – 105° [ Fig. O5 / O6 ]:

When the tube

(1)

is completely up, the tube

position

(P)

. The mower cannot be started in this position.

Transport position

(T)

approx. 0° – 22° [ Fig. O5 / O7 ]:

For transport, the mower can be carried by the tube

handle

(5)

When the mower is carried, the handle

The mower cannot be started in this position.

To adjust the cutting height [ Fig. O8 ]:

The cutting height can be adjusted from 30 – 50 mm in 3 positions.

1. Push the height adjustment

(11)

the height adjustment

(11)

to the desired position.

2. Let the height adjustment

(11)

engage in the desired position.

To start the mower [ Fig. O1 /O9 ]:

DANGER! Risk of injury!

Risk of injury if the product does not stop when you

release the start lever.

v Do not bypass the safety devices or switches. For example

do not attach the start lever to the handle.

To start:

The product is provided with a two-switch safety device (safety

key with starting lockout) to prevent the product from being turned

on by accident.

into a mains socket.

(B)

(Lc)

at the charger flashes green

(Lc)

at the charger illuminates

(Lc)

indicates that

indicates that the mains plug is inserted in the

(P)

on the product [ Fig. O4 / O8 ]:

Battery charge status indication

(L1)

(L2)

(L3)

and

illuminate green

(L1)

(L2)

and

illuminate green

(L1)

illuminates green

(L1)

flashes green

(1)

must be in the

(W)

(1)

is in the parking

(1)

or by the

(1)

is in the transport position

in the direction of the wheel and set

1. Open the lid

(4)

2. Put the battery

(B)

3. Put the safety key

4. Push the starting lockout

with the other hand.

The mower starts and the battery charge status indication

displayed for 5 seconds.

5. Release the starting lockout

To stop:

1. Release the start lever

The mower stops.

2. Turn the safety key

Tips to use the mower:

To produce a well-maintained lawn and optimise the cutting performance,

we recommend to cut the lawn regularly once a week if possible. The lawn

becomes denser if you cut it frequently.

After relatively long cutting intervals (holiday lawn), first of all cut in one

direction with the highest cutting height and then cut in the crosswise

direction with the required cutting height.

If possible, only cut the grass when it is dry, if the grass is damp, the

cutting pattern will be uneven.

Cutting performance and battery charge:

The lawn area which can be cut on each battery charge depends on

several factors such as moisture, grass density and cutting height.

(P)

In order to ensure an optimal use of space, do not turn the mower on

and off too frequently as this severely reduces the battery running time.

The cutting performance for each battery charge can be ideally utilised

by increasing the cutting height and frequent mowing.

Mulching:

The specially shaped blade ensures optimum cutting and mulching results.

The blades of grass are not simply cut off, but cut into small particles

which fall onto the ground between the blades of grass, thus reducing

the drying out of the lawn. Grass cuttings do not have to be collected

or disposed of and are a natural fertiliser.

The best mulching result is achieved when 1/3 of the grass height is cut

(e. g. from 60 mm to 40 mm).

The maximum area of 50 m² can only be achieved with optimum conditions.

4. MAINTENANCE

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

(1)

v Wait for the blade to stop, remove the safety key and use

gloves before you maintain the product.

To clean the mower:

DANGER! Risk of injury!

Risk of injury and risk of damage to the product.

v Do not clean the product with water or with a water jet

(in particular high-pressure water jet).

v Do not clean with chemicals including petrol or solvents.

(T)

Some can destroy critical plastic parts.

To clean the underside of the mower [ Fig. M1 ]:

The underside is easiest to clean after you mowed.

1. Lay the mower on its side carefully.

2. Clean the underside and the blade

scraper

(10)

(do not use sharp objects).

To clean the overside of the mower:

v Clean the overside with a damp cloth.

To clean the battery and the battery charger:

Make sure that the surface and the contacts of the battery and the battery

charger always are clean and dry before you connect the battery charger.

Do not use running water.

v Battery charger: Clean the contacts and the plastic parts with a soft

and dry cloth.

v Battery: Occasionally clean the ventilation slots and the terminals on

the battery using a soft brush that is clean and dry.

into the battery holder

(D)

until it audibly engages.

(6)

into the handle and turn it to position

(7)

with one hand and pull the start lever

(7)

(8)

(6)

to position

and remove it.

(9)

with a brush and the enclosed

(8)

(P)