Lexmark C746 Renk Kalitesi Kılavuzu

Yazıcı Lexmark C746 için çevrimiçi göz atın veya pdf Renk Kalitesi Kılavuzu indirin. Lexmark C746 6 sayfaları. Setup sheet
Ayrıca Lexmark C746 için: Teknik Not (3 sayfalar), Manuel (14 sayfalar), Bağlantı Kılavuzu (5 sayfalar), Kağıt El Kitabı (4 sayfalar), Menü Haritası (3 sayfalar), Baskı Kılavuzu (4 sayfalar), Manuel (2 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Kurulum Sayfası (2 sayfalar)

Sayfayı Yazdır
Lexmark C746 Renk Kalitesi Kılavuzu
Color quality guide
The Color quality guide helps users understand how operations available on the printer can be used to adjust and customize
color output.

Quality menu

Use
Print Mode
Color
Black Only
Color Correction
Auto
Off
Manual
Print Resolution
1200 dpi
4800 CQ
Toner Darkness
1–5
Enhance Fine Lines
On
Off
To
Specify whether images are printed in black and white or in color.
Notes:
•
Color is the factory default setting.
•
The printer driver is capable of overriding this setting.
Adjust the color output on the printed page.
Notes:
•
Auto is the factory default setting. Auto applies different color conversion tables to
each object on the printed page.
•
Off turns off color correction.
•
Manual allows customization of the color tables using the settings available in the
Manual Color menu.
•
Due to the differences in additive and subtractive colors, certain colors that appear on
computer monitors are impossible to duplicate on the printed page.
Specify the printed output resolution in dots per inch or color quality (CQ).
Note: 4800 CQ is the factory default setting.
Lighten or darken the printed output.
Notes:
•
4 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
•
If Print Mode is set to Black Only, then a setting of 5 increases toner density and
darkness to all print jobs.
•
If Print Mode is set to Color, then a setting of 5 is the same as a setting of 4.
Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit
diagrams, and flow charts.
Notes:
•
Off is the factory default setting.
•
To set Enhance Fine Lines from the software program, with a document open, click
File > Print, and then click Properties, Preferences, Options, or Setup.
•
To set Enhance Fine Lines using the Embedded Web Server, type the printer IP address
in a Web browser.
Color quality guide
Page 1 of 6