Lexmark C925 Manuel - Sayfa 12

Yazıcı Lexmark C925 için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark C925 14 sayfaları. Setup sheet
Ayrıca Lexmark C925 için: Yönetici El Kitabı (20 sayfalar), Yönetici El Kitabı (12 sayfalar), Bağlantı Kılavuzu (7 sayfalar), Yayın Notu (4 sayfalar), Yönetici El Kitabı (13 sayfalar), Bakım Kılavuzu (15 sayfalar), Yönetici El Kitabı (12 sayfalar), Hızlı Referans (10 sayfalar), Kağıt El Kitabı (3 sayfalar), Menü Haritası (2 sayfalar), Taşıma Kılavuzu (2 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Baskı Hataları Kılavuzu (1 sayfalar), Kurulum (2 sayfalar), Hızlı Referans (12 sayfalar), Hizmet Eğitimi (18 sayfalar)

Sayfayı Yazdır
Lexmark C925 Manuel
A
VOID TEXTURED PAPER WITH ROUGH FINISHES
C
P
HECK THE
APER
Make sure the Paper Type setting matches the paper loaded in the tray or feeder:
•
From the printer control panel Paper menu, check the Paper Type setting.
•
For Windows users, check this setting from Print Properties.
•
For Macintosh users, check this setting from the Print dialog.
M
AKE SURE THE TONER CARTRIDGE IS NOT LOW ON TONER
When 88.xx [color] cartridge low appears, make sure the toner is distributed evenly within the print cartridge.
1
Remove the toner cartridge.
2
Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.
3
Reinsert the toner cartridge.
Note: If print quality does not improve, replace the print cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact customer support.
M
AKE SURE THERE IS NO DEFECTIVE TONER CARTRIDGE
Replace the defective toner cartridge.

Transparency print quality is poor

Try one or more of the following:
C
HECK THE TRANSPARENCIES
Use only transparencies that meet the printer specifications.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting is set to Transparency:
1
From the printer control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.

Toner specks

Cause
Toner cartridges may be worn or defective.
Toner is in the paper path.
T
YPE SETTING
Solution
Replace the defective or worn cartridges.
Call for service.
Print quality guide
Page 12 of 13