Lexmark C925 Manuel - Sayfa 3

Yazıcı Lexmark C925 için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark C925 14 sayfaları. Setup sheet
Ayrıca Lexmark C925 için: Yönetici El Kitabı (20 sayfalar), Yönetici El Kitabı (12 sayfalar), Bağlantı Kılavuzu (7 sayfalar), Yayın Notu (4 sayfalar), Yönetici El Kitabı (13 sayfalar), Bakım Kılavuzu (15 sayfalar), Yönetici El Kitabı (12 sayfalar), Hızlı Referans (10 sayfalar), Kağıt El Kitabı (3 sayfalar), Menü Haritası (2 sayfalar), Taşıma Kılavuzu (2 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Baskı Hataları Kılavuzu (1 sayfalar), Kurulum (2 sayfalar), Hızlı Referans (12 sayfalar), Hizmet Eğitimi (18 sayfalar)

Lexmark C925 Manuel
8
From the printer control panel, touch the left or right arrow to select that number.
9
Repeat steps 9 and 10 to align sets B through L.
10
Touch Back > Exit Config Menu.
Note: If necessary, adjust the color alignment again.

Clipped images

Try one or more of the following:
C
HECK THE GUIDES
Move the width and length guides in the tray to the correct positions for the paper size loaded.
C
HECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Size setting.
2
Before sending the job to print, specify the correct size setting:
For Windows users, specify the size from Print Properties.
For Macintosh users, specify the size from the Page Setup dialog.

Fine horizontal lines appear on color pages

You may notice fine, horizontal lines in photographs or pages with a high concentration of color. This can occur when the
printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).

Shadow images appear on prints

ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
C
HECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
2
Before sending the job to print, specify the correct type setting:
For Windows users, specify the type from Print Properties.
For Macintosh users, specify the type from the Print dialog.
Print quality guide
Page 3 of 13