Lexmark C925 Manuel - Sayfa 7

Yazıcı Lexmark C925 için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark C925 14 sayfaları. Setup sheet
Ayrıca Lexmark C925 için: Yönetici El Kitabı (20 sayfalar), Yönetici El Kitabı (12 sayfalar), Bağlantı Kılavuzu (7 sayfalar), Yayın Notu (4 sayfalar), Yönetici El Kitabı (13 sayfalar), Bakım Kılavuzu (15 sayfalar), Yönetici El Kitabı (12 sayfalar), Hızlı Referans (10 sayfalar), Kağıt El Kitabı (3 sayfalar), Menü Haritası (2 sayfalar), Taşıma Kılavuzu (2 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Baskı Hataları Kılavuzu (1 sayfalar), Kurulum (2 sayfalar), Hızlı Referans (12 sayfalar), Hizmet Eğitimi (18 sayfalar)

AKE SURE THE TRANSFER MODULE IS NOT DEFECTIVE

Replace the defective transfer module. For more information, see the instruction sheet that came with the replacement part.

AKE SURE THE FUSER IS NOT DEFECTIVE

Replace the defective fuser. For more information, see the instruction sheet that came with the replacement part.

Repeating defects appear on a page

Cause

If marks occur repeatedly in only one color and multiple times on a page:

The transfer module is defective.

An imaging unit is defective.

If marks occur down the page repeatedly in all colors:

The fuser is defective.

These are possible solutions. Try one or more of the following:

HECK THE PAPER GUIDES

Move the length and width guides in the tray to the correct positions for the paper size loaded.

•

Make sure the guides are not too far from the paper stack.

•

Make sure the guides are not pressing too lightly against the paper stack.

HECK THE PAPER

Make sure you are using paper that meets the printer specifications.

Solution

)

Replace the transfer module if the defects occur every:

•

38 mm (1.50 in.)

Replace the imaging unit if the defects occur every:

•

41.0 mm (1.61 in.)

•

75.0 mm (2.95 in.)

Replace the fuser if the defects occur every:

•

141 mm (5.55 in.)

Print quality guide

Page 7 of 13