Lexmark Color Laser Yönetici El Kitabı - Sayfa 13

Yazıcı Lexmark Color Laser için çevrimiçi göz atın veya pdf Yönetici El Kitabı indirin. Lexmark Color Laser 20 sayfaları. Finisher setup guide
Ayrıca Lexmark Color Laser için: Bağlantı Kılavuzu (5 sayfalar), Sıkışmaları Giderme Kılavuzu (2 sayfalar), Sıkışmaları Giderme Kılavuzu (2 sayfalar), Bağlantı Kılavuzu (6 sayfalar), Kurulum (2 sayfalar), Yönetici El Kitabı (12 sayfalar), Bağlantı Kılavuzu (7 sayfalar), Yayın Notu (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Lexmark Color Laser Yönetici El Kitabı
Activating Eco-Mode
1
Touch Eco-Mode > select a setting.
2
Touch
or Done.
Notes:
•
If your printer model supports duplex printing, then you will be able to print on both sides of the paper. Choose
Paper to set 2-Sided Printing.
•
Choose Energy/Paper to automatically set 2-Sided Printing and Sleep Mode to default values. You will no longer
be able to modify 2-Sided Printing and Sleep Mode after selecting Energy/Paper.
Activating 2-Sided Printing (duplex)
1
Touch 2-Sided Printing, and then select 2-Sided Long Edge, or 2-Sided Short Edge.
2
Touch
or Done.
Activating Quiet Mode
1
Touch Quiet Mode > On.
2
Touch
or Done.
Note: In Quiet Mode, the printer runs at a speed that is slower than the default speed. You should notice an increase
in processing time for your print jobs.
Setting other options
1
Adjust Standby Mode to set the time (1–240 minutes) the printer waits before going into standby mode.
2
Adjust Sleep Mode or Power Saver to set the time (1–240 minutes) the printer waits before going into Sleep Mode
or Power Saver mode.
3
Adjust Screen Brightness to set the screen brightness settings (20–100%).
4
Adjust Darkness or Toner Darkness to set the darkness settings of your printed documents.
Setting advanced options
Note: This option is available only on printers that support the Embedded Solutions Framework (eSF) 3.0.
1
Touch Advanced Options to configure Schedule Power Modes.
Scheduling an energy-saving task
a
Touch the Action left or right arrow to select an energy-saving task.
b
Touch the Time icon to set the time when to perform the energy-saving task.
c
Touch the Day(s) left or right arrow to specify the day.
d
Touch Add to save the configuration.
Configuring the application
13