Avaya IP OFFICE 2420 Kullanıcı Kılavuzu - Sayfa 3

IP Telefon Avaya IP OFFICE 2420 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avaya IP OFFICE 2420 6 sayfaları. Avaya ip office 2420 quick reference guide
Ayrıca Avaya IP OFFICE 2420 için: Kullanıcı Kılavuzu (5 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Son Kullanıcı Kılavuzu (19 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (5 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar), Hızlı Kılavuz (4 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar), Manuel (6 sayfalar), Kurulum ve Güvenlik Talimatları (17 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Overview

The 201-type Module Recorder Interface is an optional device that, when installed with the Avaya 2420 Digital

Telephone, allows you to record telephone conversations.

In addition, this module allows you to use the two headset jacks on the 20-type stand rather than a single headset

jack directly connected to the 2420 telephone.

NOTE: Disconnect the 2420 telephone from the wall jack and remove power before removing and/or installing

the 201-type module. Refer to the 20-Type Stand, 200-Type Module Analog (U.S.) Adjunct Interface, and

201-Type Module Recorder Interface Installation and Safety Instructions (555-233-132) for more information.

Requirements

The 201-type module requires the installation of the 20-type stand. Refer to the 20-Type Stand, 200-Type Module

Analog (U.S.) Adjunct Interface, and 201-Type Module Recorder Interface Installation and Safety Instructions

(555-233-132) for more information.

Switch Settings

Two sets of switches are provided on the 201-type module, allowing you to:

•

enable/disable the "beep tone" that alerts callers when you are recording the call in progress

•

specify whether the single headset jack on the 2420 telephone or the dual headset jacks on the 20-type stand

are active

NOTE: The headset jacks on the 20-type stand and the one on the 2420 telephone cannot be active

simultaneously.

Refer to the 20-Type Stand, 200-Type Module Analog (U.S.) Adjunct Interface, and 201-Type Module Recorder

Interface Installation and Safety Instructions (555-233-132) for more information.

Headsets Supported

The headset adapter cord used with the 2420 telephone is not compatible with the headset jacks on the 20-type

stand. When the 20-type stand is installed, a separate adapter cord (Quick Disconnect to Black RJ, part ID

407721034) is used with the headset jacks on the 20-type stand. Unlike the headset jack on the 2420 telephone,

the headset jacks on the 20-type stand are intended for use without an auxiliary amplifier base unit (M12LUCM) or

amplifier adapter cord (HIC-1). (The Quick Disconnect to Black RJ adapter cord is not compatible with the

headset jack on the 2420 telephone.) The following headsets are supported:

•

Starset top H31

•

Mirage top H41

•

Mirage top H41N

•

Supra Monaural top H51

•

Supra Monaural NC top H51N

•

Supra Binaural top H61

•

Supra Binaural NC top H61N

•

Encore Monaural Voice Tube H91

•

Encore Monaural NC top H91N

•

Encore Binaural Voice Tube H101

•

Encore Binaural NC top H101N