Lexmark Consumer Inkjet Bilgi Güncellemesi - Sayfa 3

Yazıcı Lexmark Consumer Inkjet için çevrimiçi göz atın veya pdf Bilgi Güncellemesi indirin. Lexmark Consumer Inkjet 4 sayfaları. Setup sheet
Ayrıca Lexmark Consumer Inkjet için: Kurulum Talimatları (2 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Hızlı Kılavuz (2 sayfalar), Kurulum Talimatları (2 sayfalar), Hızlı Referans (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Hızlı Kılavuz (2 sayfalar), Kurulum Sayfası (2 sayfalar)

Sayfayı Yazdır
Lexmark Consumer Inkjet Bilgi Güncellemesi
4
From the Printer port drop-down menu, select the printer you want to install, and then click
Next.
5
Follow the instructions on your screen to align the cartridges.
6
From the Printer Setup is Complete screen, click Test Page to print a test page on the network
printer.
7
Click Continue to complete printer software installation and for instructions about registering
your printer.
8
Repeat these steps for each additional Lexmark Z65n printer you want to install on your
computer.
Replacing your printer with an identical Lexmark printer for Macintosh
Follow the steps for your operating system to replace your printer with another Lexmark Z65 printer.
Mac OS 8.6 to 9.2
1
Make sure your computer is on.
2
Disconnect the old printer.
3
Connect the replacement printer to your computer, install the cartridges, and load plain inkjet
paper into paper tray 1. For help, refer to the setup sheet that came with your printer.
If you plug in the new printer and try to print without doing the following steps, you will get an
error message that says that there is a problem communicating with the printer. When the
message appears, click Cancel and complete the following steps to make your replacement
printer work properly.
4
Select and drag the Lexmark Z65 desktop printer icon (the icon for your old printer) to the trash
can.
5
From the Apple menu, choose Control Panels
6
From the Printer Selection screen, select your replacement printer.
Lexmark Z65 Control Panel.
3