Lexmark CS410dn Hızlı Referans - Sayfa 8
Yazıcı Lexmark CS410dn için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark CS410dn 14 sayfaları. Cs410 series colour laser printers
Ayrıca Lexmark CS410dn için: Teknik Özellikler (2 sayfalar), Hızlı Kılavuz (2 sayfalar), Veri Sayfası (2 sayfalar), Veri Sayfası (2 sayfalar), Özellikler (2 sayfalar)
Sayfayı Yazdır
•
Do not slide the paper into the tray. Load paper as shown in the
illustration.
•
Make sure the guides in the tray or the multipurpose feeder are
properly positioned and are not pressing tightly against the paper
or envelopes.
•
Push the tray firmly into the printer after loading paper.
Use recommended paper
•
Use only recommended paper or specialty media.
•
Do not load wrinkled, creased, damp, bent, or curled paper.
•
Flex, fan, and straighten paper before loading it.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same tray.
•
Make sure the paper size and type are set correctly on the computer
or printer control panel.
•
Store paper according to manufacturer recommendations.
Understanding jam messages and
locations
When a jam occurs, a message indicating the jam location and
information to clear the jam appears on the printer display. Open the
doors, covers, and trays indicated on the display to remove the jam.
Note: When Jam Recovery is set to On or Auto, the printer reprints
jammed pages. However, Auto does not guarantee that the page will
print.
1
2
3
4
7
Jam location
Message on the
display
1
Standard bin
Jam, standard
bin [203.xx]
2
Fuser
Jam, fuser. Open
front door. [202.xx]
3
Front door
Jam, front
door [20y.xx]
4
Duplex
Jam, duplex area.
Open front
door. [23y.xx]
8
Jam location
5
Tray [x]
6
Manual feeder
7
Multipurpose
feeder
[x]‑page jam, clear standard bin.
1
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
5
6
What to do
2
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Remove the jammed
paper.
Next > Clear the jam, press OK, and then press
Open the front door,
pull the tab and hold
[x]-page jam, open front door to clear
the fuser cover down,
and then remove the
fuser.
jammed paper.
1
Open the front door.
Open the front door,
and then remove the
CAUTION—HOT SURFACE: The inside of the printer might
jammed paper.
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
Open the front door,
and then remove the
jammed paper.
Message on the
What to do
display
Jam, tray [x] [24y.xx] Pull the indicated tray
out, and then remove
the jammed paper.
Jam, manual
Remove the jammed
feeder [251.xx]
paper.
Jam, MP
Push the paper release
feeder [250.xx]
lever to lift the paper
rollers, and then
remove the jammed
paper.
to clear the message
to confirm.