Gardena 6000/6 inox Premium 1736 Operatör El Kitabı - Sayfa 4
Su Pompası Gardena 6000/6 inox Premium 1736 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Gardena 6000/6 inox Premium 1736 14 sayfaları. Garden pump
Ayrıca Gardena 6000/6 inox Premium 1736 için: Kullanım Talimatları Kılavuzu (10 sayfalar), Kullanım Talimatları Kılavuzu (12 sayfalar), Operatör El Kitabı (10 sayfalar), Operatör El Kitabı (10 sayfalar), Kullanım Talimatları Kılavuzu (17 sayfalar)
Sayfayı Yazdır
Extension cables
Date indicated on the type plate must match technical
data of the mains supply.
Only use extension cables authorised in accordance with
HD 516.
v Consult your qualified electrician.
v Don't use the power cable for carrying the pump or for
plugging off.
In Austria
In Austria, the electrical connections must be made
according to ÖVE-EM 42, T2 (2000) / 1979 § 22 based
on § 2022. Pursuant to this regulation it's imperative to
operate pumps for swimming pools and garden ponds
exclusively via an isolating transformer.
v Please ask your electrician.
In Switzerland
In Switzerland mobile appliances which are used out-
doors, must be connected via a residual- current device.
Visual check
v Before operating the pump, first make a visual cheek,
if there is any damage of the pump (esp. regarding
power cable and plug).
A damaged pump must not be used.
v In case of damage, please have the pump checked
by our GARDENA Service Centre or by an authorised
electrician.
v If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
2. INITIAL OPERATION
Setting up your Garden Pump:
The site must be firm and solid in order to ensure safe and
sturdy operating conditions for the pump.
v Position the pump at a safe distance (min. 2 m) from the
liquid to be pumped.
The pump must be installed in a location with low air
humidity and sufficient ventilation in the area of the ven-
tilation slots. It must be at a distance of at least 5 cm
from the walls. No dirtcontamination (e.g. sand or earth)
may be sucked in through theventilation slots.
Connecting hose to suction side [ Fig. I1 ]:
Don't use any hose connection system fittings on the
suction side! A vacuum-resistant suction hose must be
used, e. g. GARDENA Suction Unit, Art. 1411.
In order to reduce the suction time, it is advisable to use
a suction hose with backflow preventer avoiding automatic
draining of the suction hose when the pump is stopped.
1. Screw a vacuum-resistant suction hose
the connector on the suction side of the pump
2. For suction heights exceeding 4 m also secure the
1
suction hose
(e.g. by fastening it to a wooden post).
12
Note
v Protect the pump from rain. Don't use the pump in wet
or moist area.
In order to avoid dry-running of the pump, take care that
the end of the suction hose is always submerged into the
liquid.
v Before each operation, fill the pump to overflowing with
approx. 2 to 3 l of the liquid to be pumped!
Sand and other abrasive substances in the liquid cause
in-creased wear and reduce the pump's output.
Pumping dirty water, e.g. stones, pine needles etc., can
cause damage to the pump.
v Do not pump dirty water.
The minimum flow rate is:
4000/5: 90 l/h (= 1.5 l/min);
5000/5: 200 l/h (= 3.3 l/min).
Watering accessories with lower rate must not be
operated.
DANGER! This product makes an electromagnetic field
while it operates. This field may under some conditions
interfere with active or passive medical implants. To
decrease the risk of conditions that can possibly injure or
kill, we recommend persons with medical implants to
speak with their physician and the medical implant manu-
facturer before you operate the product.
DANGER! Small parts can be easily swallowed. There
is also a risk that the polybag can suffocate toddlers.
Keep toddlers away when you assemble the product.
This relieves the pump of the weight of the suction
hose.
Connecting hose to delivery side [ Fig. I2 ]:
The pumps have 2 connections
The pump connection not in use has to be closed by the
cap
4
, which can be unscrewed for connecting 2 hoses.
The pump connections
(G 1") thread which can be used to connect 13 mm (1/2"),
16 mm (5/8") or 19 mm (3/4") hoses via the GARDENA
hose connection system.
Optimised use of the pump capacity is achieved by con-
necting 19 mm (3/4") hoses with e.g. GARDENA Pump
Connection Set Art. 1752, or by connecting 25 mm (1")
hoses with GARDENA Quick Thread Coupling with
female thread Art. 7109 / Quick Coupling Hose
Connector Art. 7103.
v Connect the pressure hose
delivery side
If more than 2 hoses / accessories are connected simul-
taneously, we recommend using the GARDENA 2
1
airtight onto
or 4Channel Water Distributor Art. 8193 / 8194,
2
.
GARDENA TwinTap Connector Art. 940 which can
be screwed directly onto the connection on the delivery
3
side
/
3
3
ß
/
are equipped with a 33.3 mm
3a
5
to the connector on the
3
/
ß
.
3a
ß
.
3a
ß
/
on the delivery side.
3a