Lexmark CX510 series E-Posta Kılavuzu

Yazıcı Lexmark CX510 series için çevrimiçi göz atın veya pdf E-Posta Kılavuzu indirin. Lexmark CX510 series 4 sayfaları. Cx510 series colour multifunction laser printer
Ayrıca Lexmark CX510 series için: Teknik Not (3 sayfalar), Kurulum Sayfası (2 sayfalar), Renk Kalitesi Kılavuzu (5 sayfalar), Kopyalama Kılavuzu (4 sayfalar), Faks Kılavuzu (4 sayfalar), Ftp Kılavuzu (4 sayfalar), Sarf Malzemeleri Kılavuzu (3 sayfalar), Ürün Özellikleri (2 sayfalar), Teknik Özellikler (2 sayfalar), Teknik Özellikler (2 sayfalar), Özellikler (2 sayfalar), Servis Kılavuzu (20 sayfalar)

Sayfayı Yazdır
Lexmark CX510 series E-Posta Kılavuzu
E-mail guide
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.
Sending an e-mail using the printer control panel
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same.
3
From the home screen, navigate to:
E-mail > Recipient(s)
4
Type the e‑mail address, or press # using the keypad, and then enter the shortcut number.
Notes:
•
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.
•
You can also enter an e‑mail address using the address book.
5
Touch Done > Send It.
Sending an e‑mail using a shortcut number
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
Press #, then enter the shortcut number using the keypad, and then touch
Note: To enter additional recipients, touch Next address, and then enter the address or shortcut number that you want
to add.
4
Touch Send It.
Sending an e‑mail using the address book
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
E-mail guide
Page 1 of 4
.