Avaya J159 Hızlı Referans - Sayfa 7

IP Telefon Avaya J159 için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Avaya J159 7 sayfaları. In an open sip environment
Ayrıca Avaya J159 için: Hızlı Referans Kılavuzu (5 sayfalar), Hızlı Referans (6 sayfalar), Hızlı Kılavuz (6 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar)

Sayfayı Yazdır
Avaya J159 Hızlı Referans
2. Scroll to Settings and press Select.
3. Scroll to Network and press Select.
4. Scroll to Network mode.
The Network mode setting shows the following
options:
• Ethernet: To connect to an Ethernet network.
• Wi-Fi: To connect phone to a Wi-Fi network.
5. Press one of the following:
• Toggle
• Right Arrow key
• Left Arrow key
6. When Network mode displays Wi-Fi, the following
lines are shown on the Phone screen:
• SSID: The name of the Wi-Fi network that the
phone is either currently connected to, or will
attempt to connect to if you start the connection
process.
• Wi-Fi network: Scroll to this line and press Select
to view the list of Wi-Fi networks.
7. After selecting the network mode, press Save.
8. When you switch Network mode from Ethernet to
Wi-Fi, see Connecting to a Wi-Fi network section.
9. When you switch Network mode from Wi-Fi to
Ethernet, press Save.
10. When the phone prompts for permission to restart,
press OK.
Press Cancel to go back to previous step.

Connecting to a Wi-Fi network

Use this procedure if your phone is not configured to
connect to a specific Wi-Fi network.
• Ensure that the system administrator gave you
access to perform this task.
• Select Wi-Fi as your network mode.
• When you set the network mode, note the SSID, as
this is the name of the Wi-Fi network that the phone
will attempt to connect to.
• Depending on the type of security in the Wi-Fi
network, obtain the required credentials. Contact
your system administrator for more details.
• Ensure that the system administrator enables hidden
Wi-Fi feature.
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to Network and press Select.
4. To access the list of available Wi-Fi networks, scroll to
Wi-Fi network and press Select.
The phone displays all available Wi-Fi network,
including the hidden Wi-Fi.
5. Scroll to the required Wi-Fi network and press
Connect to start the connection process.
You can connect to the hidden Wi-Fi network.
6. To restart the phone, press OK.
7. If the security is WEP or WPA/WPA2 PSK, in
Password, enter the password for the Wi-Fi network.
8. If the security is 802.1x EAP, enter the following:
• Identity: Either your personal user ID or the shared
user ID provided by your system administrator.
• Anonymous Identity: Leave blank or use the
shared Anonymous Identity provided by your
system administrator.
• Password: Either your personal password or
the shared password provided by your system
administrator.
If the credentials are authenticated successfully, the
phone automatically restarts to complete the connection.
Viewing USB menu
Use this procedure to view the USB menu for information
on connected USB devices.
Connect the USB device to the phone and ensure that
USB support is enabled.
1. Press Main Menu.
2. Scroll to Settings and press Select.
3. Scroll to USB and press Select.
You can view the list of USB devices connected to the
phone, such as a USB flash drive and keyboard.
For more information
Go to
www.avaya.com/support
for latest support
information, including the user guide, administrator guide,
installation and maintenance guide, interactive document,
and software downloads.
7