Gardena FSP 12000 Economic Kullanım Talimatları Kılavuzu - Sayfa 4

Su Pompası Gardena FSP 12000 Economic için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena FSP 12000 Economic 13 sayfaları. Filter / stream pump
Ayrıca Gardena FSP 12000 Economic için: Kullanım Talimatları Kılavuzu (14 sayfalar)

Sayfayı Yazdır
7862-20.960.02_05.08.2008:GARDENA

4. Initial Operation

Connecting the hose s:
³⁄₄ "
1 "
1 ¹⁄₄ "
1 ¹⁄₄ "
1 ¹⁄₂ "
1 ¹⁄₂ "
FSP 3500
FSP 5500 Economic
FSP 8500 Economic
FSP 12000 Economic
FSP 16000 Economic
1
Switch Automatic Energy
Control (AEC) on :
3
4
6
Switch pump on :
5
12
05.08.2008
The universal connector
3500 only), 1 " , 1 ¹⁄₄ " and 1 ¹⁄₂ " hoses.
1 "
To achieve the best pumping results (maximum delivery rate of
the pump) use a 38 mm (1 ¹⁄₂ " )-hose. We recommend that you
secure all hoses using GARDENA Hose Clips art. no. 7192 /
7195.
1. Depending on the hose, cut away the parts of the universal
connector
Otherwise loss of performance could occur.
2. Screw universal connector
3. FSP 5500 - FSP 16000 : Pay attention that the O-ring
inserted correctly.
4. Connect hose to the universal connector
z
O
Only for FSP 12000 Economic / FSP 16000 Economic :
1. Undo screws
2
2. Press in snap fastening
3. Set switch
On = AEC switched on
Off = AEC switched off
4. Close the filter housing
place, if applicable.
If using a pond filter, separate the filter outlet and the pump by
as much distance as possible in the pond. This will achieve the
best possible cleaning effect for the pond water.
v Note the maximum submersion depth (see 9. Technical Data).
1. Place the pump in the water in such a way that the filter
housing
2. Plug mains plug into an AC socket.
Warning : Pump will start immediately.
For infinitely variable control of the flow rate and in case of 2 con-
3
nection points (e.g. simultaneous operation of stream and filter),
the GARDENA 2-way Regulator Valve Art. 7867
09:09
Seite 12
can be used to connect ³⁄₄ " (for FSP
1
1
you do not need using a saw.
1
onto the pump.
6
(transit support).
2
and open up the filter housing
4
to the position wanted On / Off.
3
and fit the screws
3
is covered by at least 20 cm of water.
z
is
O
1
.
3
.
6
back into
5
can be used.