Gardena WSP 7000 Kullanım Talimatları Kılavuzu - Sayfa 6

Su Pompası Gardena WSP 7000 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena WSP 7000 14 sayfaları. Submersible pump / dirty water pump
Ayrıca Gardena WSP 7000 için: Kullanım Talimatları Kılavuzu (8 sayfalar), Kullanım Talimatları Kılavuzu (14 sayfalar)

Gardena WSP 7000 Kullanım Talimatları Kılavuzu
Manual operation :
1
5
3
Only for the
submersible pump 7000 :
Flat suction /
Normal operation
8

5. Putting into Storage

Frost-free storage :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
The pump remains in constant operation because the float switch
is bypassed.
2
1. Push the float switch
cable downward.
2. Stand the pump on a firm surface
– or –
use a rope attached through the bore hole in the carrying
2
handle
3. Plug the power cable
The residual water height is only reached during manual
operation since the float switch turns off the pump during
automatic operation before this water level is reached.
Flat suction :
v Turn the 3 swivel feet
180° to 1 mm.
The residual water level of approx. 1 mm is only reached during
flat suction in the manual operation mode. If the water level is
lower than 25 mm, you can accelerate flat suction by switching
the pump off and on 2 to 3 times.
If the water height is lower than 3.5 cm, fill the pump before
operation over the universal fitting
v Store the pump away from frost before the first frost sets in.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
5
onto the float switch lock
to immerse the pump in a well or shaft.
1
into a mains socket.
Normal operation :
8
v Turn the 3 swivel feet
3
with the
180° to 5 mm.
7
with water.
8
15