Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Hızlı Referans - Sayfa 10
Yazıcı Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa 19 sayfaları. Brochure
Ayrıca Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa için: Kurulum (2 sayfalar), Teknik Özellikler (4 sayfalar), Teknik Özellikler (4 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
2
Prepare a paper stack for loading by flexing and fanning it back and forth. Straighten the
edges on a level surface.
3
Adjust the rear paper guide for the print media size you will be loading.
Note: There should be a slight gap between the rear paper guide and the paper stack.
4
Insert the paper stack with the print side facing down.
Note: Make sure the paper stack is laying flat in the tray and is not above the maximum
paper fill indicators. Improper loading may cause jams.
Loading the 250-sheet tray
10