Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa Hızlı Referans - Sayfa 18
Yazıcı Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa 19 sayfaları. Brochure
Ayrıca Lexmark E250DN - Govt Laser 30PPM Special Build Mono Taa için: Kurulum (2 sayfalar), Teknik Özellikler (4 sayfalar), Teknik Özellikler (4 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
7
Lift the green flap at the front of the printer, and remove the jammed pages from behind the
flap.
8
Open the rear exit door, and remove the jammed pages.
9
After you have cleared the jammed pages, reinstall the print cartridge assembly, and securely
close all the printer doors.
10
Press Continue
Note: Jam recovery is set to Auto by default. When jam recovery is set to Auto, the
memory that holds the image of a page may be reused after the page is printed but
before it has successfully exited the printer if that memory is needed for another
use. Therefore, a jammed page may or may not be reprinted, depending on the
overall memory usage of the printer.
CAUTION:The fuser or fuser area may be hot.
to resume printing.
Clearing jams
18