Broadata LBC-HDBT2-T/R-48 Kullanıcı Kılavuzu - Sayfa 8

Verici Broadata LBC-HDBT2-T/R-48 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Broadata LBC-HDBT2-T/R-48 16 sayfaları. Link bridge hdbaset 2.0 hdmi transmission with 48v poh over 100m

Sayfayı Yazdır
Link Bridge

2.4 Receiver Left and Right Panels

Left
CAT5e/6/7 IN
1
1. CAT5e/6/7 IN: Connect to the Transmitter unit with a single
CAT5e/6/7 cable for transmission of all data signals. The yellow
LED will illuminate to represent the link from Receiver is steady,
when
it blinks irregularly it represents the link error or when not
illuminated it means no link with Receiver. The green LED will
illuminate to represent the PoE function active.
2. LAN: Connect to a PC or Laptop to the internet or network
connection. The yellow LED will illuminate to represent the
link with Transmitter is steady, when it blink irregularly it
represent the link error or when not illuminate it means no link
with Receiver. The green LED will illuminate to represent the
Ethernet speed is with 100Mbit/s.
3. OPT. IN: Connect to audio source equipment such as DVD
or Blu-ray player for audio signal sending to Transmitter's
OPTICAL OUT.
4. ARC IN or OPT. IN SWITCH: Switch this switch to select ARC
channel. Switch to ARC in to use HDMI OUT's audio or switch
to Optical IN to use Optical 1's audio.
Note: Depending on the connected devices of the HDMI
OUT & Optical in, the ARC input/output transmission
distance may be varied. It is suggested to use cable within
2 meters long to ensure the best audio quality.
5. HDMI OUT: Connect to a HDMI equipped TV/monitor for display
of the HDMI input source signal.
Broadata Technical Support, [email protected]
LBC-HDBT2-T/R-48 User Manual
HDBaseT 2.0 HDMI Transmission w/48V PoH over 100m
TM
LAN
2
Right
OPT.
OPT.
ARC
IN
IN
IN
HDMI OUT
4
5
3
9