Lexmark E332 Teknik Talimatlar - Sayfa 5

Yazıcı Lexmark E332 için çevrimiçi göz atın veya pdf Teknik Talimatlar indirin. Lexmark E332 8 sayfaları.

Lexmark E232/330/332 Technical Instructions

Photo 26

REMANUFACTURING THE DRUM UNIT

Photo 27

Photo 28

Photo 29

Step 24

Fill the hopper with toner and install the

fill plug.

Step 25

Replace the chip found on the bottom of

the cartridge. (See Photo 26)

Step 26

Test the cartridge.

Step 1

Step 1: Remove the two screws (one on

each end of the cartridge) that hold the

toner hopper locking mechanism.

(See Photos 27 & 28)

Step 2

Step 2: Remove the locking mechanism.

(See Photo 29)

Step 3

Flip the waste hopper onto its

back. Remove the "E" Clip from

the drum axle on the small gear

side.

(See Photo 30)

Photo 30

Step 4

Slide the drum axle out of the

waste hopper from the drive

gear side.

(See Photo 31)

Photo 31