Gardena 9874-20 Operatör El Kitabı - Sayfa 6

Düzeltici Gardena 9874-20 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Gardena 9874-20 10 sayfaları.

Sayfayı Yazdır

3. OPERATION

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

v Wait for the cutting filament to stop and disconnect the

product from the mains before you connect, adjust or

transport the product.

To connect the trimmer [ Fig. O1 ]:

DANGER! Electric shock!

To avoid damage to the mains cable the extension cable must

be inserted into the cable lock.

v Before you operate the trimmer insert the extension cable into

the cable lock.

1. Loop the extension cable

(8)

, insert the loop into the cable lock

pull tight.

2. Connect the plug

(10)

of the trimmer into the socket

(8)

cable

(8)

3. Connect the extension cable

To set the working position:

Working position 1 [ Fig. O2 ]:

For standard trimming.

Working position 2 [ Fig. O3 /O4 ]:

Trimming beneath obstacles.

The tube can be lowered from standard position 1 to two lowered

positions 2 or 3 for trimming beneath obstacles.

1. Put the trimmer on the floor.

(7)

2. Hold the trimmer by the tube

(12)

the unlock button

with one finger.

(12)

3. Push the unlock button

and lower the tube

position.

4. Release the unlock button

(12)

and let the tube

Working position 3 (only for Art. 9872 / 9874) [ Fig. O5 /O6 ]:

Cutting at lawn edges.

CAUTION! The trimmer may only be used when the trimmer head

is locked at 0° or 90°.

To rotate the trimmer head

(1)

position 1.

(7)

1. Hold the trimmer by the tube

(13)

the unlock button

with one finger.

(13)

2. Push the unlock button

and rotate the trimmer head

to 90° until it engages.

3. Release the unlock button

(13)

and let the tube

To adjust the tube length [ Fig. O7 ]:

DANGER!

The product must not be used when the tube is completely

inserted (transport position).

(6)

1. Loosen the clamping sleeve

2. Pull out the tube

(7)

to the required length.

3. Tighten the clamping sleeve again

To adjust the position of the additional handle [ Fig. O8 ]:

The position of the additional handle can be adjusted to your body height.

1. Pull the lever

(14)

(15)

2. Tilt the additional handle

to the desired position.

(14)

3. Release the lever

again.

If the trimmer is correctly set to the body height, the posture is upright

and the trimmer head in working position 1 is tilted forwards slightly.

v Hold the trimmer by the main handle

such a manner that the trimmer head is tilted forwards slightly.

To adjust the plant guard:

– Work position [ Fig. O9 ]

– Park position [ Fig. O10 ]

(9)

(11)

of the extension

to the mains.

with both hands so that you can push

(7)

to the required

(7)

engage again.

to 90°, the tube must be in standard

with both hands so that you can push

(1)

from 0°

(7)

engage again.

(6)

(16)

and additional handle

(15)

v Pull off the plant guard

it engages.

To start the trimmer [ Fig. O11 ]:

DANGER! Risk of injury!

Risk of injury if the product does not stop when you

release the start lever.

v Do not bypass the safety devices or switches. For example do

not attach the start lever to the handle.

To start:

1. Hold the additional handle

2. Hold the main handle

The trimmer starts.

CAUTION! Avoid contact of the cutting filament with hard objects

(walls, stones fences etc.) to prevent the cutting filament from wearing

or breaking.

and

To stop:

v Release the start lever

The trimmer stops.

To extend the cutting filament (Tip mechanism) [ Fig. O12 / O13 ]:

The tip mechanism operates when the motor operates.

The best result occurs only with the maximum cutting filament length.

During first operation, it can be necessary to extend the cutting filament

many times.

Only for Art. 9872 / 9874: The cutting filament must not be extended in

working position 3.

1. Start the trimmer.

2. Hold the trimmer head

a solid surface (avoid constant pressure for extended periods).

The cutting filament

(18)

that can be heard and adjusted to the correct length with the filament

limiter

(19)

. If necessary tap many times again and again.

4. MAINTENANCE

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

v Wait for the cutting filament to stop and disconnect the

product from the mains before you maintain the product.

To clean the trimmer [ Fig. M1 ]:

DANGER! Risk of injury!

Risk of injury and risk of damage to the product.

v Do not clean the product with water or with a water jet

(in particular high-pressure water jet).

v Do not clean with chemicals including petrol or solvents.

Some can destroy critical plastic parts.

The airflow slots must always be clean.

1. Clean the airflow slots

2. Clean all movable parts after each operation. Especially remove any

grass and dirt from the protective cover

5. STORAGE

To put into storage:

The product must be stored away from children.

1. Disconnect the trimmer from the mains.

2. Clean the trimmer (see 4. MAINTENANCE).

3. Store the trimmer in a dry, enclosed and frost-free place.

Disposal:

(in accordance with RL2012/19/EC)

The product must not be disposed of to normal household waste.

It must be disposed of in line with local environmental regulations.

IMPORTANT!

v Dispose of the product through or via your municipal recycling

collection centre.

(5)

and put it on into the required position until

(15)

with one hand.

(16)

with the other hand and pull the start lever

(17)

(1)

parallel to the ground and shortly tap onto

is automatically extended with a mechanism

(20)

with a soft brush (do not use a screwdriver).

(2)

(17)