Broadata Link Bridge LBC-PSW52 Kullanıcı Kılavuzu - Sayfa 11

Anahtar Broadata Link Bridge LBC-PSW52 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Broadata Link Bridge LBC-PSW52 20 sayfaları. Presentation scaling switch with 5 inputs and two mirrored outputs

Sayfayı Yazdır

LBC-PSW52 User Manual

Link Bridge

Presentation Scaling Switch

Note 2: The installation shall be in accordance with the applicable

provisions of the National Electrical Code ANSI/NFPA 70, Article

725 and the Canadian Electrical Code, Part 1, Section 16.

Note 3: The power supply shall not be permanently fixed to the

building structure or similar structures.

Note 4: The power supply shall not be located within

environmental air handling spaces or within the wall cavity.

Note 5: The power supply is to be located within the same

vicinity as the A/V processing equipment in an ordinary location,

Pollution Degree 2, secured to the equipment rack within the

dedicated closet, podium or desk

5.0 MAINTENANCE AND TROUBLESHOOTING

5.1 Maintenance

There is no operator maintenance other then keeping the units

clean. However, observe the following light indicators to make

sure that the unit is working properly:

5.2 Troubleshooting

If the LBC-PSW52 units do not operate properly after installation,

check for possible cable breaks, loose connections, and

incorrect cable connections. If problems persist that may be

fiber related, contact BCI at 1-800-214-0222 for further

assistance.

Broadata Technical Support, (800) 214-0222