Lexmark E462 Hızlı Referans

Yazıcı Lexmark E462 için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark E462 2 sayfaları. Maintenance guide
Ayrıca Lexmark E462 için: Teknik Not (3 sayfalar), Baskı Kılavuzu (10 sayfalar), Bağlantı Kılavuzu (5 sayfalar), Medya El Kitabı (4 sayfalar), Ağ Kurulumu (4 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Kurulum Sayfası (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Bakım Kılavuzu (10 sayfalar)

Quick Reference

Pull the tray completely out.

Squeeze the width guide tabs on the right guide as shown, and

slide the width guides to the sides of the tray.

Squeeze the length guide tabs together as shown, and slide

the length guide to the correct position for the paper size being

loaded.

Flex the sheets back and forth to loosen them, and then fan

them. Do not fold or crease the paper. Straighten the edges on

a level surface.

Load the paper stack toward the back of the tray as shown with

the recommended print side facedown.

Note: Notice the maximum fill line on the side of the width

guide which indicates the maximum height for loading paper.

Do not try to overload the tray.

Loading paper

Maximum fill line

When loading letterhead, place the top edge of the sheet

toward the front of the tray. Load the letterhead with the

design placed facedown.

Squeeze the width guide tabs on the right guide, and slide the

width guides to lightly touch the side of the stack.

Insert the tray.