KitchenAid MICROWAVE HOOD COMBINATION Kullanıcı Talimatları - Sayfa 3
Havalandırma Davlumbazı KitchenAid MICROWAVE HOOD COMBINATION için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. KitchenAid MICROWAVE HOOD COMBINATION 9 sayfaları. Microwave hood combination
Ayrıca KitchenAid MICROWAVE HOOD COMBINATION için: Kullanıcı Talimatları (17 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Kullanıcı Kılavuzu (9 sayfalar)
Sayfayı Yazdır
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Observe all governing codes and ordinances.
Required:
■
A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.
Recommended:
■
A time-delay fuse or time-delay circuit breaker.
■
A separate circuit serving only this microwave oven.
For information on setting the clock, timer, child lock, vent fan and cooktop light, and to view the list of options on the Settings & Info or
Hints & Settings menu (depending on your model), see your Quick Reference Guide.
Turntable
Turntable may be turned off (on some models) for manual cooking
only. This is helpful when cooking with plates that are bigger than
the turntable, or when cooking with plates that are side by side.
Turntable cannot be turned off during preset or sensor (on some
models) functions.
Cooking Rack (on some models)
Use only for 2-level cooking. To avoid damage to the microwave
oven, always remove rack after 2-level cooking. To avoid damage
to the microwave oven due to soil buildup, clean rack supports
often.
Grill Element (on some models)
The grill element has a 1,000-watt halogen bulb and a 500-watt
quartz bulb. The halogen bulb glows very brightly, but the quartz
bulb has a very faint glow that might not be visible.
Electrical Requirements
■
For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING:
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.
This device complies with Part 18 of the FCC Rules.
Settings
Features
Convection Element and Fan (on some models)
The convection element and fan are embedded in the wall of the
microwave oven cavity, behind the metal screen.
Progress Bar
The progress bar is a visual picture of the estimated running time of
sensor functions. It appears under "Sensing" in the display.
Interactive Touch Display
The LCD interactive touch display is designed to be easily
navigable, guiding you through the menus, offering multiple
selections, accepting your input and executing your commands.
It also shows instructions, tips and graphics.
TRUCAPTURE
The vent fan comes on automatically during convection and grill
cooking (on some moodels), and it also comes on if the cooktop
below gets too hot.
3
GROUNDING INSTRUCTIONS
Improper use of the grounding plug can
SAVE THESE INSTRUCTIONS
®
Ventilation System (on some models)