Gardena ErgoCut 58 Kullanım Talimatları Kılavuzu - Sayfa 7
Düzeltici Gardena ErgoCut 58 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena ErgoCut 58 13 sayfaları. Electric hedge trimmer
Ayrıca Gardena ErgoCut 58 için: Kullanım Talimatları Kılavuzu (12 sayfalar), Kullanım Talimatları Kılavuzu (12 sayfalar)
Sayfayı Yazdır
6. Troubleshooting
Fault
Hedge trimmer does not start
Hedge is not cleanly cut
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.
7. Accessories
GARDENA Maintenance Oil
8. Technical Data
Power consumption, motor
Voltage / Frequency
Strokes
Length of cutter blade
Tooth gap of cutter blade
Weight
Workplace related
sound pressure level L
Noise emission value L
Hand / arm vibration a
Measuring process complying with 1) EN 774 2) EU-directive 2000 / 14 / EC
DANGER ! Electric shock !
V Always unplug the mains plug and slide the
A
Possible Cause
Extension cable not plugged
in or is damaged.
Cutting unit not locked in 0° or
90° position.
Blade blunt or damaged.
Extends the life of the blade.
ErgoCut 48 (Art. 8875)
550 W
230 V / 50 Hz
2,800 / min.
48 cm
27 mm
3.7 kg
84 dB (A)
pA 1)
measured 94 dB (A) /
WA 2)
guaranteed 95 dB (A)
< 2.5 m / s
2
vhw 1)
1
protective cover
over the cutter blade
before troubleshooting.
Remedy
v Plug in the extension cable
v Lock cutting unit in 0° or
v Have blade replaced by
ErgoCut 58 (Art. 8876)
550 W
230 V / 50 Hz
2,800 / min.
58 cm
27 mm
3.8 kg
85 dB (A)
measured 95 dB (A) /
guaranteed 96 dB (A)
2
or if necessary replace it.
90° position.
GARDENA-Service.
Art. 2366
15